Most common failures | No# failures |
---|
Headlamp aim out of alignment | 5 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 3 |
Headlamp aim beam image kick up to the offside |1.8| | 3 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 3 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 3 |
Offside rear brake recording little or no effort |3.7.B.5a| | 3 |
Rear parking brake recording little or no effort | 2 |
Brakes imbalanced across an axle | 2 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 2 |
Nearside Headlamp not working on main beam |1.7.5a| | 2 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Horn not working |1.6.2a| | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded front spring mount area |2.4.A.3| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Front Front constant velocity joint is insecure |2.5.C.1b| | 1 |
Offside Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 1 |
Battery insecure |1.9.1| | 1 |
Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Nearside Side repeater missing |1.4.A.2b| | 1 |
Offside Side repeater missing |1.4.A.2b| | 1 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Spare wheel insecure |6.4.2| | 1 |
Offside Rear Leaf spring shackle bracket loose |2.4.B.6a| | 1 |
Brake load sensing valve linkage seized |3.6.E.3| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
front brake binding both |3.7.B.1| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Rear brake binding | 1 |
Brake pipe excessively corroded | 1 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Registration plate lamp issues | 1 |
Offside Rear fog lamp missing |1.3.2a| | 1 |
Nearside Rear Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement |2.4.B.2| | 1 |
Offside Rear Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement |2.4.B.2| | 1 |
Nearside Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii)) | 1 |
Oil leaking excessively from engine (8.4.1 (a) (i)) | 1 |
Offside Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Offside Side repeater not working (4.4.1 (a) (ii)) | 1 |
Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear end (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front end (5.3.6 (a) (i)) | 1 |
Rear Exhaust system insecure (6.1.2 (a)) | 1 |
Fuel hose leaking (6.1.3 (b) (i)) | 1 |
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |