Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 19 |
Horn not working (7.7 (a)) | 14 |
Headlamp aim out of alignment | 13 |
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 8 |
Registration plate lamp issues | 6 |
Windscreen washer not working | 4 |
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 4 |
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 3 |
Offside Rear Direction indicator incorrect colour (4.4.3 (a)) | 3 |
Exhaust system insecure (6.1.2 (a)) | 3 |
Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 3 |
Central Exhaust system insecure (6.1.2 (a)) | 2 |
Nearside Rear Service brake excessively binding (1.2.1 (f)) | 2 |
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 1 |
Nearside Rear Passengers seat backrest cannot be secured in the upright position. (6.2.6 (a) (i)) | 1 |
Windscreen damaged and affecting the drivers view of an obligatory external mirror (3.2 (a) (ii)) | 1 |
Rear Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
Exhaust system insecure exhaust rubbers split x2 (6.1.2 (a)) | 1 |
Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
Offside Headlamp not working on dipped beam replaced bulb (4.1.1 (a) (ii)) | 1 |
Rear Exhaust system insecure rear exhaust rubber snapped (6.1.2 (a)) | 1 |
Offside Front Service brake excessively fluctuating (1.2.1 (e)) | 1 |
Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Central Rear Seat belt buckle missing (7.1.2 (d)) | 1 |
Oil leaking excessively from engine engine oil ,feed pipe at front of exhaust has poor connection (8.4.1 (a) (i)) | 1 |
Exhaust emissions exceed default limit of 0.7m-1 (8.2.2.2 (b)) | 1 |
Anti-lock braking system warning lamp indicates an ABS fault | 1 |
Electronic stability control warning lamp indicates a fault (7.12 (e)) | 1 |
Fuel tank leaking (6.1.3 (b) (i)) | 1 |
Brake hose damaged | 1 |
Rear Exhaust system insecure Zip ties have been replaced with two rubbers. (6.1.2 (a)) | 1 |
Rear Exhaust system insecure (6.1.2 (a)) | 1 |
Central Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Rear Service brake excessively fluctuating (1.2.1 (e)) | 1 |
Nearside Front Headlamp aim not tested (4.1.2 (b)) | 1 |
Offside Rear Side repeater incorrect colour (4.4.3 (a)) | 1 |
Offside Front Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g)) | 1 |
Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt nearside and offside (6.1.7 (g) (ii)) | 1 |
Nearside Front Daytime running lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Front Daytime running lamp not working (4.2.1 (a) (ii)) | 1 |
Nearside Rear All direction indicators incorrect colour (4.4.3 (a)) | 1 |
Offside Rear All direction indicators incorrect colour (4.4.3 (a)) | 1 |
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |