Most common failures | No# failures |
---|
Front Brake lever has inadequate reserve travel |3.1.3b| | 11 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 10 |
Headlamp aim out of alignment | 9 |
Registration plate issues | 9 |
Front Hydraulic brake control feels spongy |3.1.4a| | 9 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 5 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Front Brake lever is inoperative |3.1.3c| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 3 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 3 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Hydraulic brake control feels spongy |3.1.4a| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Fuel cap sealing washer missing |7.2.2c| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Exhaust system insecure |6.1.2 |a|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Registration plate lamp issues | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Riders seat with a defective supporting structure (6.2.5 (a) (i)) | 1 |
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake lever cannot be released smoothly |3.1.3d| | 1 |
Offside Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Lower Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Offside Front Upper Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Steering lock stop ineffective |2.1.3| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
Rear Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
Brake hose damaged | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear position lamp does not illuminate immediately when it is switched on number plate lamp |1.1.3a| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Rear Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced rear retaining nut missing (6.1.1 (b) (ii)) | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Nearside Rear Rear suspension component cracked |2.4.A.1a| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Nearside Steering lock stop maladjusted |2.1.3| | 1 |
Offside Steering lock stop maladjusted |2.1.3| | 1 |
Front Brake disc significantly and obviously worn has excessive run-out (1.1.14 (a) (i)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear suspension component loose engine mount support |2.4.A.1a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Brake performance not tested |3.3| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Centre Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Centre Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Brake caliper|s| insecure |3.2.A1j| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Stop lamp does not illuminate immediately a brake applies from front brake lever |1.3.1a| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Nearside Rear Lower An item not tested |Manual| | 1 |
Offside Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Front Gradient brake test indicates a sticking brake |3.3.D1c| | 1 |
Rear Exhaust mounting missing |7.1.1c| | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear suspension component seized |2.4A2a|ii|| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Front position lamp insecure |1.1.1c| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Brake hose leaking fluid |3.2.B4| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |