Most common failures | No# failures |
---|
Front Brake lever has inadequate reserve travel |3.1.3b| | 22 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 15 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 13 |
Headlamp aim out of alignment | 13 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 11 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Front Hydraulic brake control feels spongy |3.1.4a| | 6 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 5 |
Registration plate issues | 5 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 4 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Fuel cap sealing washer missing |7.2.2c| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Front Brake component has restricted free movement and operation is likely to be impeded front brake caliper bolt fouling disc ... |3.2.A1h| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Nearside Inner Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front Headlamp incorrect colour |1.2.1| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Nearside Front Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Motorcycle structure excessively corroded |6.1.1a| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Front Brake component leaking fluid |3.2.B4| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Front Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Centre Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Motorcycle structure cracked FRONT MUDGUARD CRACKED SHOWING SHARP EDGES |6.1.1a| | 1 |
Front Front shock absorber seal failed and leaking oil BOTH FORK SEALS LEAKING |2.3.3| | 1 |
Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Centre Front Lower Brake disc|s| excessively scored |3.2.A1l| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Front shock absorber seal failed and leaking oil both |2.3.3| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Front Brake lever pivots excessively worn |3.1.3a| | 1 |
Front Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |