Most common failures | No# failures |
---|
Headlamp aim out of alignment | 39 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 26 |
Steering headbearing has excessive free play |2.2.2| | 20 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 17 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
Registration plate issues | 13 |
Exhaust is leaking and excessively noisey |7.1.1b| | 13 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 12 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 12 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 11 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 11 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 10 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 9 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 8 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 7 |
Fuel cap sealing washer missing |7.2.2c| | 7 |
Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 6 |
Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 6 |
Brake lever has inadequate reserve travel |3.1.3b| | 6 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 5 |
Headlamp insecure |1.2.3b| | 5 |
Exhaust excessively deteriorated |7.1.1a| | 5 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 4 |
Horn not working |1.7.3a| | 4 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Front wheel bearings are excessively rough |2.3.5b| | 4 |
Front Steering headbearing has excessive free play |2.2.2| | 4 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 3 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Front Hydraulic brake control feels spongy |3.1.4a| | 3 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 3 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Registration plate lamp issues | 2 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Brake performance not tested |3.3| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Centre Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Rear wheel bearings have excessive free play (2.4.A.2c) | 2 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Headlamp aim not tested |1.6| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
Rear Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Front Brake caliper insecurely mounted and braking performance affected bolt loose, marked in yellow |1.1.16 |c| |ii|| | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Offside Rear suspension component loose |2.4.A.1a| | 1 |
Offside Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Nearside Front Brake disc contaminated |1.1.14 |b|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Front Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Front Brake hose fouling |3.2.B3b| | 1 |
Centre Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Nearside Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Offside Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Steering control fouling between components which interferes with the free movement of the steering (2.1.2a) | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Brake component cracked and seriously reduced in strength |3.2.A1| | 1 |
Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Offside Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Position lamp switch faulty |1.1.4a| | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Riders seat insecure |6.2.5 |a| |ii|| | 1 |
Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Direction indicator insecure |1.5.3b| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Nearside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Indicator switch insecure |1.5.4| | 1 |
Headlamp aim beam image too far to the right |1.6.4| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Rear Brake lever mounting insecure |3.1.2a| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Brake caliper|s| insecure |3.2.A1j| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Drive belt fouling another component |6.2.1d| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Exhaust silencer insecure |8.1.1 |b| |i|| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Nearside Front Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Front Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Steering lock stop ineffective |2.1.3| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Nearside Brake lever has insufficient reserve travel Rear brake. |1.1.2 |a|| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Nearside Front Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Brake pipe inadequately supported |3.2.B2b| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Wheel fixing loose (single fixing) (5.2.1 (a) (ii)) | 1 |
Headlamp damaged and function impaired |1.2.3a| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Brake lever is inoperative |3.1.3c| | 1 |
Centre Rear Upper Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Rear Brake fluid not visible (1.1.10 (d) (iii)) | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Front Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Rear mono-shock insecure |2.4.B.4| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Front Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
Nearside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Front Fork yoke deformed |2.1.1b| | 1 |
Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Central Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Central Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Offside Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Centre Front Horn not working |1.7.3a| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Rear Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Nearside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |