| Most common failures | No# failures |
|---|
| Windscreen wiper does not clear the windscreen effectively | 8 |
| Rear brake binding | 4 |
| Service brake: efficiency below requirements |3.7.B.7| | 4 |
| Brakes imbalanced across an axle | 4 |
| Headlamp aim out of alignment | 4 |
| Front brake application uneven | 3 |
| Offside Front wheel bearing rough when rotated |2.5.A.2| | 2 |
| Brake load sensing valve linkage seized |3.6.E.3| | 2 |
| Offside Front Headlamp not working on dipped beam |1.7.5a| | 2 |
| Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 2 |
| Offside Front Direction indicator incorrect colour |1.4.A.2f| | 2 |
| Registration plate lamp issues | 2 |
| Windscreen has damage | 2 |
| Nearside Front Shock absorbers has a serious fluid leak | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i)) | 2 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i)) | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Brake hose excessively deteriorated | 1 |
| Offside Rear Stop lamp|s| adversely affected by the operation of another lamp |4.3.3 |b|| | 1 |
| Offside Front front brake binding |3.7.B.1| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Nearside Stop lamp not working |1.2.1b| | 1 |
| Offside Obligatory mirror seriously deteriorated, affecting the rear view |8.1.2a| | 1 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
| Rear fog lamp lens defective such that emitted light is adversely affected showing white light to rear |4.5.1 |b| |ii|| | 1 |
| Nearside Rear Stop lamp not working |1.2.1b| | 1 |
| Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Nearside Headlamp insecure |1.7.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Brake pipe excessively corroded | 1 |
| Nearside Front Wheel stud|s| missing |4.2.A.1e| | 1 |
| Nearside Rear Wheel stud|s| missing |4.2.A.1e| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength holed near spring top mount (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength under arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Offside Rear Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Strut top mount panel (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Central Stop lamp emits other than a steady red light |1.2.1e| | 1 |
| Rear Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) | 1 |
| Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Nearside Front Wheel bolt|s| missing |4.2.A.1e| | 1 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i)) | 1 |
| Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced BUMPER (6.1.1 (c) (i)) | 1 |
| Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced JACKING PONT (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CENTRE FLOOR (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced BEHIND SHOCK ABSORBER (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SUBFRAME MOUNTING (6.1.1 (c) (i)) | 1 |
| Horn not working |1.6.2a| | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL |6.1.1 |c| |i|| | 1 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL |6.1.1 |c| |i|| | 1 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL |6.1.1 |c| |i|| | 1 |
| Nearside front brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring Mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring Mount |5.3.6 |a| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Centre Outrigger |6.1.1 |c| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Centre Outrigger |6.1.1 |c| |i|| | 1 |
| Offside Front Floor excessively deteriorated Floor by Handbrake Underside |6.2.4 |a| |i|| | 1 |
| Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Rear Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2| | 1 |
| Offside Front constant velocity joint is insecure |2.5.C.1b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Nearside Rear Suspension weakened allowing body or other component to foul a road wheel or would do so if laden shock absorber no damping |2.4.A.1b| | 1 |
| Offside Rear Suspension weakened allowing body or other component to foul a road wheel or would do so if laden shock absorber no damping |2.4.A.1b| | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush lower arm, rear bush |2.4.G.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 1 |
| Centre Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt Split (6.1.7 (g) (ii)) | 1 |
| Brake fluid warning lamp inoperative |3.6.G.2| | 1 |
| Nearside Front Lower Steering linkage ball joint ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount (5.3.6 (a) (i)) | 1 |
| Offside Parking brake mechanism/associated mounting prescribed area is excessively corroded (1.1.21 (e) (i)) | 1 |
| Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Mechanical brake component has restricted free movement | 1 |