| Most common failures | No# failures |
|---|
| Brake pipe excessively corroded | 335 |
| Windscreen wiper does not clear the windscreen effectively | 327 |
| Headlamp aim out of alignment | 244 |
| Horn not working |1.6.2a| | 130 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 82 |
| Brakes imbalanced across an axle | 77 |
| Registration plate lamp issues | 55 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 55 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 50 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 46 |
| Horn not working (7.7 (a)) | 44 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 44 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 39 |
| Rear brake binding | 33 |
| Exhaust system not adequately supported |7.1.1| | 32 |
| Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 31 |
| Windscreen washer not working | 27 |
| Horn not working (7.7 (a) (ii)) | 27 |
| Service brake: efficiency below requirements |3.7.B.7| | 25 |
| Nearside Stop lamp not working |1.2.1b| | 23 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 23 |
| Offside Front Direction indicator incorrect colour |1.4.A.2f| | 22 |
| Offside Rear Service brake excessively binding (1.2.1 (f)) | 22 |
| Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3| | 22 |
| Parking brake: efficiency below requirements |3.7.B.7| | 21 |
| Nearside Rear Direction indicator incorrect colour |1.4.A.2f| | 21 |
| Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 20 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 20 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 19 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 19 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 19 |
| Brake hose excessively deteriorated | 18 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 18 |
| Offside Stop lamp not working |1.2.1b| | 18 |
| Offside Rear Direction indicator incorrect colour |1.4.A.2f| | 18 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 18 |
| Battery insecure |1.9.1| | 17 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 16 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 16 |
| Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b)) | 16 |
| Front brake disc in such a condition that it is seriously weakened | 15 |
| Registration plate issues | 15 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 14 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 14 |
| Centre Exhaust system not adequately supported |7.1.1| | 14 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 13 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 12 |
| Offside Rear fog lamp not working |1.3.2b| | 12 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 12 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 12 |
| Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 11 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 11 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 11 |
| Headlamp levelling device inoperative (4.1.5 (a)) | 10 |
| Emissions not tested |7.0| | 10 |
| Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 10 |
| Horn not working |7.7 |a| |ii|| | 10 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 10 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 10 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 10 |
| Nearside Front Service brake excessively binding (1.2.1 (f)) | 10 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 10 |
| Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 9 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 9 |
| Nearside Front wheel bearing has excessive play |2.5.A.3c| | 9 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits |8.2.1.2 |c|| | 9 |
| Offside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 9 |
| Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 8 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 8 |
| Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 8 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 8 |
| Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
| Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
| Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 8 |
| Nearside Rear Stop lamp not working |1.2.1b| | 8 |
| Exhaust system insecure (6.1.2 (a)) | 8 |
| Emissions not tested (8.2.1.2 (d)) | 8 |
| Exhaust carbon monoxide content at idle exceeds manufacturers specified limits (8.2.1.2 (b)) | 8 |
| Headlamp switch faulty |1.7.1| | 7 |
| Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 7 |
| Offside Front wheel bearing has excessive play |2.5.A.3c| | 7 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 7 |
| Nearside Front Direction indicators incorrect colour |1.4.A.2f| | 7 |
| Brake load sensing valve seized |3.6.E.3| | 7 |
| Offside Front Direction indicators incorrect colour |1.4.A.2f| | 7 |
| Rear brake application uneven | 7 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 7 |
| Windscreen wiper blade insecure | 7 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits |8.2.1.2 |b|| | 7 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
| Rear fog lamp tell tale not working |1.3.1b| | 6 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 6 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 6 |
| Central Exhaust has a major leak of exhaust gases |7.1.2| | 6 |
| Offside Rear Direction indicator incorrect colour (4.4.3 (a)) | 6 |
| Brake performance not tested |3.7.A.1| | 6 |
| Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 6 |
| Nearside Side repeater not working (4.4.1 (a) (ii)) | 6 |
| Nearside Windscreen wiper blade deteriorated |8.2.2| | 6 |
| Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 6 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
| Exhaust mounting missing |7.1.1b| | 6 |
| Nearside Rear position lamp|s| not working |1.1.A.3b| | 6 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
| Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 6 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 6 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 6 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 6 |
| Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 6 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 6 |
| Front brake application uneven | 6 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 6 |
| Nearside Rear Direction indicator incorrect colour |4.4.3 |a|| | 6 |
| Fuel cap/sealing device ineffective (6.1.3 (b) (i)) | 6 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 6 |