>

MOT History from tests of petrol PEUGEOT BOXERs year 1999

Review the list of common PEUGEOT BOXER failures below or to perform a specific mot history check on your PEUGEOT then use our popular KnowYourCar service

mot history
Pass percent:61.32%
(The average a petrol PEUGEOT BOXER year 1999 passes without issue)
Based on:4,361 MOT Tests
Most common failuresNo# failures
Windscreen wiper does not clear the windscreen effectively335
Brake pipe excessively corroded305
Headlamp aim out of alignment252
Horn not working |1.6.2a|147
Registration plate lamp issues63
Windscreen washer not working 53
Exhaust has a major leak of exhaust gases |7.1.2|53
Brakes imbalanced across an axle49
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3|49
Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3|42
Exhaust system not adequately supported |7.1.1|38
Rear brake binding31
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|29
Horn not working (7.7 (a) (ii))29
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|28
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|27
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|27
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))25
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|25
Nearside Stop lamp not working |1.2.1b|24
Nearside Front Direction indicator incorrect colour |1.4.A.2f|24
Offside Front Direction indicator incorrect colour |1.4.A.2f|22
Centre Exhaust has a major leak of exhaust gases |7.1.2|22
Offside Stop lamp not working |1.2.1b|21
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3|20
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6|20
Horn not working |7.7 |a| |ii||20
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3|19
Brake hose excessively deteriorated19
Battery insecure |1.9.1|18
Service brake: efficiency below requirements |3.7.B.7|18
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))18
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|18
Rear Exhaust has a major leak of exhaust gases |7.1.2|17
Centre Exhaust system not adequately supported |7.1.1|17
Emissions not tested |7.0|16
Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4|16
Nearside Rear Suspension has inadequate clearance with the bump stop |2.4.A.1a|16
Offside Rear Suspension has inadequate clearance with the bump stop |2.4.A.1a|16
Registration plate issues15
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6|14
Parking brake: efficiency below requirements |3.7.B.7|14
Horn not working (7.7 (a))14
Nearside Front wheel bearing has excessive play |2.5.A.3c|13
Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3|13
Offside Front wheel bearing has excessive play |2.5.A.3c|13
Offside Rear fog lamp not working |1.3.2b|12
Nearside Front position lamp|s| not working |1.1.A.3b|11
Nearside Rear Direction indicator incorrect colour |1.4.A.2f|11
Offside Front Position lamp not working (4.2.1 (a) (ii))10
Exhaust Lambda reading after 2nd fast idle outside specified limits |8.2.1.2 |c||10
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))10
Nearside Rear Stop lamp not working |1.2.1b|10
Rear brake application uneven10
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a))10
Fuel cap/sealing device sealing washer deteriorated |7.2.4c|10
Front brake excessively fluctuating10
Service brake efficiency below requirements (1.2.2 (a) (i))9
Offside Rear Direction indicator incorrect colour |1.4.A.2f|9
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|9
Horn not loud enough to be heard by another road user |1.6.2b|8
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))8
Front Exhaust has a major leak of exhaust gases |7.1.2|8
Nearside Front Front wheel bearing has excessive play |2.5.A.3c|8
Offside Rear Stop lamp not working |1.2.1b|8
Nearside Front Position lamp not working (4.2.1 (a) (ii))8
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))8
Front brake application uneven7
Rear fog lamp not working (4.5.1 (a) (ii))7
Nearside Rear Service brake excessively binding (1.2.1 (f))7
Direction indicators incorrect colour |1.4.A.2f|7
Emissions not tested (8.2.1.2 (d))7
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits |8.2.1.2 |b||7
Offside Side repeater not working (4.4.1 (a) (ii))7
Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a))7
Exhaust system insecure (6.1.2 (a))7
Exhaust has a major leak of exhaust gases (6.1.2 (a))7
Offside Rear Direction indicators incorrect colour |1.4.A.2f|7
Rear Exhaust system not adequately supported |7.1.1|7
Nearside Headlamp not working on main beam (4.1.1 (a) (ii))7
Nearside Headlamp not working on dipped beam |1.7.5a|7
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))7
Front brake disc in such a condition that it is seriously weakened6
Offside Rear wheel bearing rough when rotated |2.6.1|6
Offside Stop lamp|s| not working |4.3.1 |a| |ii||6
Brake load sensing valve seized |3.6.E.3|6
Offside Rear wheel bearing has excessive play |2.6.2|6
Offside Front Front wheel bearing has excessive play |2.5.A.3c|6
Rear Mechanical brake component has restricted free movement6
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))6
Nearside Rear Direction indicator incorrect colour (4.4.3 (a))6
Windscreen wiper blade insecure6
Nearside Headlamp not working on main beam |1.7.5a|6
Offside Front Direction indicators incorrect colour |1.4.A.2f|6
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))6
Nearside Side repeater not working (4.4.1 (a) (ii))6
Offside Rear Rear fog lamp not working |1.3.2b|6
Nearside Rear Direction indicators incorrect colour |1.4.A.2f|6
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|6
Windscreen has damage6
Offside Rear Rear wheel bearing rough when rotated |2.6.1|6
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6|6

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy