| Most common failures | No# failures |
|---|
| Windscreen wiper does not clear the windscreen effectively | 13 |
| Registration plate lamp issues | 8 |
| Headlamp aim out of alignment | 4 |
| Rear brake binding | 4 |
| Brakes imbalanced across an axle | 3 |
| Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
| Nearside rear brake recording little or no effort (3.7.B.5a) | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheelarch (5.3.6 (a) (i)) | 1 |
| Rear fog lamp not working (1.3.2b) | 1 |
| Nearside Rear Direction indicator incorrect colour (1.4.A.2f) | 1 |
| Offside Rear Direction indicator incorrect colour (1.4.A.2f) | 1 |
| Nearside Front Upper Front position lamp(s) not working (1.1.A.3b) | 1 |
| Nearside Rear position lamp(s) not working (1.1.A.3b) | 1 |
| Nearside Front position lamp(s) not working (1.1.A.3b) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheelarch (rear) (5.3.6 (a) (i)) | 1 |
| Headlamp has a product on the lens so that the light output is severely reduced both front lights deteriorated image deflectors (4.1.4 (b)) | 1 |
| Exhaust fumes causing a danger to health of persons on board egr/manifold leak (6.1.2 (b) (ii)) | 1 |
| Offside Rear Upper Outline marker lamp not working bulb (4.2.1 (a) (ii)) | 1 |
| Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Offside Rear Exhaust system insecure rubber mountings split (6.1.2 (a)) | 1 |
| Power steering malfunctioning (2.3.3a) | 1 |
| Offside Rear Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f) | 1 |
| Offside Rear Rear fog lamp not working (1.3.2b) | 1 |
| Offside Rear Stop lamp adversely affected by the operation of another lamp (1.2.1f) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
| Service brake excessively fluctuating fronts (1.2.1 (e)) | 1 |
| Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Centre Rear Stop lamp not working (1.2.1b) | 1 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Nearside Front Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Front Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Emissions unable to be completed (8.2.2.2 (e)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced lower inner sill and central inner panel of box section (7.1.1 (a) (i)) | 1 |
| Offside Front Battery insecure and likely to fall from carrier not fastened under clamps. (4.13 (a) (ii)) | 1 |
| Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing, shocker tunnel/turrett (5.3.6 (a) (i)) | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Brake hose has insufficient room to move | 1 |
| Horn not working (1.6.2a) | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting holed in front of jacking point front inner wheelarch (6.2.2 (d) (i)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting jacking point (6.2.2 (d) (i)) | 1 |
| Offside front brake binding (3.7.B.1) | 1 |
| Service brake: efficiency below requirements (3.7.B.7) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside front brake binding (3.7.B.1) | 1 |
| Offside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Rear fog lamp not working (1.3.2b) | 1 |