Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 5 |
Nearside Rear Shock absorber has a serious fluid leak (2.7.3) | 2 |
Offside Front Direction indicator incorrect colour (1.4.A.2f) | 2 |
Headlamp levelling device inoperative (4.1.5 (a)) | 2 |
Front Upper Outline marker lamp does not illuminate simultaneously with the position lamps Both (4.2.2 (a)) | 1 |
Brake load sensing valve seized (3.6.E.3) | 1 |
Centre Exhaust has a major leak of exhaust gases (7.1.2) | 1 |
Exhaust emissions carbon monoxide content excessive (7.3.B.1a) | 1 |
Nearside Front Shock absorber has a serious fluid leak (2.7.3) | 1 |
Brake pipe excessively corroded | 1 |
Offside Front Side repeater not working (1.4.A.2c) | 1 |
Centre Exhaust system not adequately supported (7.1.1) | 1 |
Service brake: efficiency below requirements (3.7.B.7) | 1 |
Front wheel bearing has excessive play both (2.5.A.3c) | 1 |
Rear wheel bearing has excessive play both (2.6.2) | 1 |
Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing under battery (6.1.B.2) | 1 |
Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch to chassis (6.1.B.2) | 1 |
Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch to chassis (6.1.B.2) | 1 |
Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch around spring (6.1.B.2) | 1 |
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s and n/s chassis (6.1.B.2) | 1 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front to rear sill (6.1.B.2) | 1 |
Offside Rear Shock absorber has a serious fluid leak (2.7.3) | 1 |
Front Exhaust has a major leak of exhaust gases (7.1.2) | 1 |
Offside Parking brake mechanism/associated mounting prescribed area is excessively corroded inner/outer sill (1.1.21 (e) (i)) | 1 |
Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner/outer sill (5.3.6 (a) (i)) | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front to rear sill (6.1.B.2) | 1 |
Horn not working (7.7 (a)) | 1 |
Emissions not tested all emssions far too high for analyser to handle (8.2.1.2 (d)) | 1 |
Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength strut turret (5.3.6 (a) (i)) | 1 |
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength jack point/outrigger (5.3.6 (a) (i)) | 1 |
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/chassis (5.3.6 (a) (i)) | 1 |
Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength o/s and n/s inner sills/outrigger (5.3.6 (a) (i)) | 1 |
Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/sill (5.3.6 (a) (i)) | 1 |
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner arch/jacking point (5.3.6 (a) (i)) | 1 |
Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/floor (7.1.1 (a) (i)) | 1 |
Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
Offside Rear wheel bearing rough when rotated (2.6.1) | 1 |
Offside Rear Braking system leaking (3.6.A.1) | 1 |
Brakes imbalanced across an axle | 1 |
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill panel (5.3.6 (a) (i)) | 1 |
Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill panel (5.3.6 (a) (i)) | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near rear spring shackle (5.3.6 (a) (i)) | 1 |
Nearside Front Exhaust system insecure silencer not supported (6.1.2 (a)) | 1 |
Exhaust has a major leak of exhaust gases (7.1.2) | 1 |
Horn not working (1.6.2a) | 1 |