Most common failures | No# failures |
---|
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
Registration plate lamp issues | 4 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 4 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Exhaust has a major leak of exhaust gases |7.1.2| | 4 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Brakes imbalanced across an axle | 3 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Windscreen wiper does not clear the windscreen effectively | 3 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Registration plate issues | 2 |
Offside Rear wheel bearing rough when rotated |2.6.1| | 2 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Rear fog lamp not working |1.3.2b| | 2 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Stop lamp not working |1.2.1b| | 2 |
Offside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 2 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 2 |
Brake pipe excessively corroded | 2 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
Nearside Front Horn not working |1.6.2a| | 1 |
Nearside Front Headlamp aim beam image kick up to the offside |1.6.B1| | 1 |
Offside Front Headlamp aim beam image kick up to the offside |1.6.B1| | 1 |
Nearside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 1 |
Brake pedal feels spongy with the vacuum fully depleted |3.3.C.2| | 1 |
Steering wheel retaining device insecure |2.1.6| | 1 |
Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Horn not working |1.6.2a| | 1 |
Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Fuel hose insecure |7.2.1| | 1 |
Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |
Front Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Rear Fuel hose leaking |7.2.3| | 1 |
Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Headlamp switch missing |1.7.1| | 1 |
Front passenger seat insecure |6.2.3| | 1 |
Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
Offside Brake pipe inadequately supported |3.6.B.1| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Rear brake application uneven | 1 |
Parking brake lever defective so that it cannot be satisfactorily operated |3.1.3c| | 1 |
Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Offside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Inner Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Inner Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Hydraulic brake calliper leaking |1.1.16 |b| |i|| | 1 |
Service brake: efficiency below requirements |3.7.D.4| | 1 |
Parking brake: efficiency below requirements |3.7.D.4| | 1 |
Nearside Rear Shock absorber detached |2.7.2b| | 1 |
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Nearside Inner Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Exhaust mounting missing |7.1.1b| | 1 |
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear parking brake recording little or no effort | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Nearside Seat belt anchorage prescribed area is fractured |5.2.6| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Seat belt anchorage prescribed area is fractured |5.2.6| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Nearside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Outer Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Nearside Brake pipe leaking |3.6.A.1| | 1 |
Brake performance not tested |3.7.A.1| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Front Brake hose leaking |3.6.A.1| | 1 |
Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Direction indicator incomplete |1.5.A1b| | 1 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
Offside Front Brake hose bulging under pressure |3.6.B.3| | 1 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Rear brake binding | 1 |