Most common failures | No# failures |
---|
Registration plate lamp issues | 18 |
Brake pipe excessively corroded | 14 |
Headlamp aim out of alignment | 10 |
Windscreen wiper does not clear the windscreen effectively | 6 |
Parking brake: efficiency below requirements |3.7.B.7| | 5 |
Offside Stop lamp not working |1.2.1b| | 4 |
Front brake disc in such a condition that it is seriously weakened | 4 |
Rear parking brake recording little or no effort | 4 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 4 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 4 |
Offside Rear Rear fog lamp not working |1.3.2b| | 3 |
Registration plate issues | 3 |
Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Offside Rear fog lamp not working |1.3.2b| | 3 |
Offside Front position lamp|s| not working |1.1.A.3b| | 3 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 2 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 2 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
Rear brake application uneven | 2 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 2 |
Parking brake mechanism/associated mounting prescribed area is fractured |3.1.9| | 2 |
Rear Exhaust system not adequately supported |7.1.1| | 2 |
Nearside Front Anti-roll bar linkage fractured |2.4.G.1| | 2 |
Brake hose excessively deteriorated | 2 |
Nearside Front Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 2 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Brakes imbalanced across an axle | 2 |
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 2 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Rear brake binding | 2 |
Rear Exhaust mounting missing |7.1.1b| | 2 |
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 2 |
Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 2 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Stop lamp not working |1.2.1b| | 2 |
Exhaust system not adequately supported |7.1.1| | 2 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 2 |
Power steering pump leaking from a failed seal |2.3.3b| | 1 |
Nearside Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 1 |
Offside Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 1 |
Nearside Macpherson strut upper support bearing is rough in operation |2.5.B.1b| | 1 |
Offside Macpherson strut upper support bearing is rough in operation |2.5.B.1b| | 1 |
Nearside Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Front Anti-roll bar linkage insecure |2.4.G.1| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Rear Upper Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 1 |
Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Inner Rear Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 1 |
Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Front brake excessively fluctuating | 1 |
Nearside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Emissions not tested |7.0| | 1 |
Offside Front Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 1 |
Nearside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 1 |
Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
Driver`s seat insecure |6.2.A.1| | 1 |
Nearside Rear An item not tested |Manual| | 1 |
Offside Rear An item not tested |Manual| | 1 |
Nearside Side repeater missing |1.4.A.2b| | 1 |
Offside Side repeater missing |1.4.A.2b| | 1 |
Offside Front Coil spring mounting loose |2.4.C.3a| | 1 |
Offside Front Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 1 |
Nearside Front Side repeater missing |1.4.A.2b| | 1 |
Offside Front Side repeater missing |1.4.A.2b| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Offside Side repeater not working |1.4.A.2c| | 1 |
Nearside Side repeater insecure |1.4.A.2b| | 1 |
Offside Side repeater insecure |1.4.A.2b| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Side repeater not working |1.4.A.2c| | 1 |
Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Centre Rear Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Offside Rear Shock absorber detached |2.7.2b| | 1 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
brake disc in such a condition that it is seriously weakened |3.5.1i| | 1 |
Nearside Rear Shock absorber insecure |2.7.2b| | 1 |
Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 1 |
Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 1 |
Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3| | 1 |
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 1 |
Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Seat belt insecurely fixed to the seat |5.2.1a| | 1 |
Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 1 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
Nearside Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Parking brake lever, pawl mechanism pivots or their associated mountings are insecure |3.1.4b| | 1 |
Front brake application uneven | 1 |
Headlamp switch faulty |1.7.1| | 1 |
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Front constant velocity joint is excessively worn |2.5.C.1b| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Rear coil spring fractured |2.4.C.1a| | 1 |
Nearside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Rear coil spring incomplete |2.4.C.1a| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6.B1| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Front Direction indicators incorrect colour |1.4.A.2f| | 1 |
Nearside Rear Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
Nearside Front Position lamp not working |4.2.1 |a| |ii|| | 1 |
Nearside Side repeater not working |4.4.1 |a| |ii|| | 1 |
Nearside Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Suspension arm insecure |2.4.G.1| | 1 |
Hazard warning switch faulty |1.4.B.1d| | 1 |
Nearside Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 1 |
Direction indicator incorrect colour |1.4.A.2f| | 1 |
Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 1 |
Nearside Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Offside Obligatory mirror insecure |8.1.1| | 1 |
Offside Rear fog lamp missing |1.3.2a| | 1 |