Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 4 |
Registration plate lamp issues | 4 |
Headlamp aim out of alignment | 3 |
Brake pipe excessively corroded | 2 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Registration plate issues | 2 |
Emissions not tested (8.2.2.2 (e)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 1 |
Nearside Rear Anti-roll bar linkage insecure and impairing directional stability (5.3.3 (a) (ii)) | 1 |
Offside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 1 |
Nearside Rear Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill panel |5.3.6 |a| |i|| | 1 |
Rear fog lamp not working |1.3.2b| | 1 |
Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Front Upper Brake master cylinder/servo mounting prescribed area is excessively corroded (1.1.21 (e) (i)) | 1 |
Nearside Front Track rod end ball joint worn to the extent there is a serious risk of detachment (2.1.3 (b) (ii)) | 1 |
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Front Side repeater not working |1.4.A.2c| | 1 |
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Offside Rear Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 1 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Rear brake application uneven | 1 |
Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.4.B.1| | 1 |
Supplementary Restraint System warning lamp indicates a fault |5.4.2| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Battery insecure |1.9.1| | 1 |
Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement D bush |2.4.G.2| | 1 |
Nearside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Fuel system component leaking around fuel tank |7.2.3| | 1 |
rear brakes release unevenly |3.7.B.4| | 1 |
Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Anti-lock braking system warning lamp indicates an ABS fault | 1 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Rear parking brake recording little or no effort | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Body has a sharp edge caused by damage nearside front bumper corner |6.1.C.1| | 1 |
Nearside Rear Brake pipe inadequately clipped on axle |3.6.B.1| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded x 2 places |5.2.6| | 1 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded x 2 places |5.2.6| | 1 |