| Most common failures | No# failures |
|---|
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 23 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 19 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 11 |
| Windscreen wiper does not clear the windscreen effectively | 11 |
| Headlamp aim out of alignment | 9 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
| Brakes imbalanced across an axle | 7 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 6 |
| Offside front brake binding |3.7.B.1| | 6 |
| Registration plate lamp issues | 6 |
| Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 6 |
| Brake hose excessively deteriorated | 6 |
| Offside Front constant velocity joint gaiter split |2.5.C.1a| | 5 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Offside Stop lamp not working |1.2.1b| | 4 |
| Brake pipe excessively corroded | 4 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
| Offside Rear fog lamp not working |1.3.2b| | 4 |
| Nearside Windscreen wiper blade deteriorated |8.2.2| | 3 |
| Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 3 |
| Nearside Steering rack gaiter split |2.2.D.2d| | 3 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
| Nearside front brake binding |3.7.B.1| | 3 |
| Nearside Rear Suspension arm corroded and seriously weakened |2.4.G.1| | 3 |
| Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Nearside Stop lamp not working |1.2.1b| | 3 |
| Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Exhaust engine idle speed too high |7.3.A.2a| | 2 |
| Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
| Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Rear Suspension arm has excessive play in a pin/bush |2.4.G.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 2 |
| Horn not working |1.6.2a| | 2 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Nearside Side repeater not working |1.4.A.2c| | 2 |
| Offside Rear Suspension arm corroded and seriously weakened |2.4.G.1| | 2 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 2 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Front front brake binding |3.7.B.1| | 2 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
| Offside Headlamp not working on main beam |1.7.5a| | 2 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Offside Rear Stop lamp not working |1.2.1b| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Nearside Outer Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
| Nearside Rear Lower Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
| Nearside Outer Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 1 |
| Offside Front Windscreen wiper blade missing |8.2.2| | 1 |
| Nearside Front Windscreen wiper blade missing |8.2.2| | 1 |
| Nearside Hazard warning lamps inoperative |1.4.B.1b| | 1 |
| Nearside Direction indicators not working |1.4.A.2c| | 1 |
| Offside Headlamp insecure |1.7.3| | 1 |
| Hazard warning switch faulty |1.4.B.1d| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded floor pan |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Rear Upper Shock absorbers likely to become detached (5.3.2 (a) (ii)) | 1 |
| Offside Rear Upper Shock absorbers likely to become detached (5.3.2 (a) (ii)) | 1 |
| Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Fuel cap/sealing device sealing washer missing |7.2.4c| | 1 |
| Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Offside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
| rear parking |secondary| brake grabbing severely |3.7.B.6b| | 1 |
| Brake master cylinder fluid level below minimum level |3.6.G.1e| | 1 |
| Nearside Rear Upper Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Upper Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Windscreen wiper blade insecure | 1 |
| Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Nearside front brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
| Nearside Front Braking system leaking |3.6.A.1| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Offside Side repeater not working |1.4.A.2c| | 1 |
| Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
| Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Headlamp insecure |1.7.3| | 1 |
| Offside Front Brake hose excessively damaged |3.6.B.4d| | 1 |
| Nearside Front Steering rack gaiter split |2.2.D.2d| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Nearside Rear Shock absorber insecure |2.7.2b| | 1 |
| Offside Rear Shock absorber insecure |2.7.2b| | 1 |
| Rear brake binding | 1 |
| Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.3.B.1| | 1 |
| Offside Front brake caliper has restricted free movement |3.5.1k| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Nearside Rear Seat belt buckle missing cannot be seen may be under seat (7.1.2 (d)) | 1 |
| Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Nearside Rear Upper Coil spring mounting damaged and seriously weakened |2.4.C.3c| | 1 |
| Offside Rear Upper Coil spring mounting damaged and seriously weakened |2.4.C.3c| | 1 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Body has a projection caused by corrosion |6.1.C.1| | 1 |
| Offside Front Body has a projection caused by corrosion |6.1.C.1| | 1 |
| Nearside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Lower Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Steering rack gaiter insecure |2.2.D.2d| | 1 |
| Rear Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Front Headlamp not in good working order |not working| |1.2.4a| | 1 |
| Nearside Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Front brake application uneven | 1 |
| Front brake disc in such a condition that it is seriously weakened | 1 |
| Offside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
| Nearside Front Seat belt retracting mechanism defective |5.2.5b| | 1 |
| Offside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Front Torsion bar deteriorated by corrosion so that its cross sectional area is reduced and seriously weakened |2.4.E.1b| | 1 |
| Registration plate issues | 1 |
| Windscreen has damage | 1 |
| Emissions not tested |7.0| | 1 |
| Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Rear fog lamp tell tale not working |1.3.1b| | 1 |
| Offside Outer Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
| Nearside Outer Front Anti-roll bar linkage worn and seriously weakened |2.4.G.1| | 1 |
| Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Front Steering rack insecure |2.2.B.1a| | 1 |
| Centre Exhaust system not adequately supported |7.1.1| | 1 |
| Rear brake application uneven | 1 |
| Offside Front position lamp|s| insecure |1.1.A.3a| | 1 |
| Offside Rear fog lamp insecure |1.3.2a| | 1 |
| Offside Rear fog lamp obscured more than 50% |1.3.2c| | 1 |
| Offside Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Offside Rear Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
| Offside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
| Nearside Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Offside Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Offside Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Offside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill hole (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch hole (6.2.2 (d) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases rear back box has hole (6.1.2 (a)) | 1 |
| Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b)) | 1 |
| Nearside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Headlamp aim beam image too far to the left |1.6.B4| | 1 |
| Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Suspension component mounting prescribed area is excessively corroded both sides inner/outer sills and inner rear arch areas |2.4.A.3| | 1 |
| Body has a sharp edge caused by corrosion all round |6.1.C.1| | 1 |
| Nearside Rear Direction indicator incorrect colour damaged and showing white light |1.4.A.2f| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Offside Front Front position lamp|s| missing |1.1.A.3a| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 1 |