Most common failures | No# failures |
---|
Headlamp aim out of alignment | 9 |
Windscreen wiper does not clear the windscreen effectively | 7 |
Brakes imbalanced across an axle | 4 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 3 |
Brake hose excessively deteriorated | 3 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Rear brake application uneven | 3 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Brake pipe excessively corroded | 3 |
Nearside Front Side repeater not working |1.4.A.2c| | 3 |
Registration plate issues | 3 |
Offside Stop lamp not working |1.2.1b| | 2 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 2 |
Nearside Rear fog lamp not working |1.3.2b| | 2 |
Offside Rear fog lamp not working |1.3.2b| | 2 |
Windscreen wiper blade insecure | 2 |
Registration plate lamp issues | 2 |
Nearside front brake binding |3.7.B.1| | 2 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Steering rack insecure |2.2.B.1a| | 1 |
Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside Headlamp insecure |1.7.3| | 1 |
Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Steering pivot point has excessive play |2.2.B.1g| | 1 |
Brake hose damaged | 1 |
Exhaust system not adequately supported |7.1.1| | 1 |
Suspension component mounting prescribed area is excessively corroded o/s front inner wing |2.4.A.3| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Rear An item not tested |Manual| | 1 |
Nearside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Rear fog lamp missing (4.5.1 (a) (ii)) | 1 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Nearside Rear Hydraulic fluid leaking excessively Cylinder (8.4.1 (a) (i)) | 1 |
Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) | 1 |
Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Headlamp insecure |1.7.3| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Rear fog lamp switch faulty |1.3.1a| | 1 |
Offside Front front brake binding |3.7.B.1| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Inner Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Offside Front Shock absorbers insecurely attached spring adjuster nuts loose |5.3.2 |a| |i|| | 1 |
Fuel hose insecure to fuel filter |6.1.3 |a| |i|| | 1 |
Offside Rear Rear fog lamp missing |4.5.1 |a| |ii|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Nearside Front Road wheel fixing missing wheel bolt |5.2.1 |a| |i|| | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch to trailing arm holed |5.3.6 |a| |i|| | 1 |
Nearside Rear Position lamp not working |4.2.1 |a|| | 1 |
Offside Rear Position lamp not working |4.2.1 |a|| | 1 |
Nearside Front Road wheel fixing missing |5.2.1 |a| |i|| | 1 |
Front Brake hose damaged and likely to fail both insecure, likely to rub on road wheel |1.1.12 |a|| | 1 |
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill and rear inner wheel arch |5.3.6 |a| |i|| | 1 |
Rear Service brake effort inadequate at a wheel both |1.2.1 |a| |i|| | 1 |
Service brake efficiency below requirements |1.2.2 |a| |i|| | 1 |
Offside Rear fog lamp missing |1.3.2a| | 1 |
Nearside Front Intermediate drop arm insecure to the extent there is excessive movement at the mountings pivot area |2.1.3 |a| |ii|| | 1 |
Nearside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Offside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Exhaust mounting missing |7.1.1b| | 1 |
Nearside Front Inner Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Inner Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door piller |6.1.B.2| | 1 |
Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
Fuel tank insecure |7.2.1| | 1 |
Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Braking system leaking |3.6.A.1| | 1 |
Brake performance not tested |3.7.A.1| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Horn not working |1.6.2a| | 1 |
Offside Rear Lower Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
Front brake application uneven | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |