Most common failures | No# failures |
---|
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 6 |
Windscreen wiper does not clear the windscreen effectively | 6 |
Brake pipe excessively corroded | 5 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Brakes imbalanced across an axle | 4 |
Registration plate lamp issues | 4 |
Registration plate issues | 4 |
Headlamp aim out of alignment | 4 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 2 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Rear Macpherson strut corroded and seriously weakened |2.4.G.1| | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 2 |
Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 2 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Rear Exhaust system not adequately supported |7.1.1| | 2 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 2 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Centre Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Driver`s seat insecure |6.2.A.1| | 1 |
Fuel cap/sealing device sealing washer deteriorated |7.2.4c| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front front brake binding |3.7.B.1| | 1 |
Centre Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Centre Front Fuel pipe leaking |7.2.3| | 1 |
Nearside Rear Brake warning device not working correctly |3.3.D.3a| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Rear Shock absorber casing corroded externally so the unit does not function |2.7.2a| | 1 |
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Steering rack gaiter insecure |2.2.D.2d| | 1 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 1 |
Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Front Service brake excessively binding (1.2.1 (f)) | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Steering rack gaiter insecure |2.2.D.2d| | 1 |
Offside Front Steering rack gaiter insecure |2.2.D.2d| | 1 |
Nearside Rear Exhaust system not adequately supported |7.1.1| | 1 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Power steering component|s| leaking |2.3.3b| | 1 |
Nearside Steering rack gaiter insecure |2.2.D.2d| | 1 |
Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Rear parking brake recording little or no effort | 1 |
Rear fog lamp obviously incorrectly positioned (4.5.4 (a)) | 1 |
Brake hose excessively deteriorated | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Rear Fuel system component insecure |7.2.1| | 1 |
Nearside Rear Rear position lamp|s| incomplete |1.1.4a| | 1 |
Nearside Front Front suspension locking device missing |2.5.A.4| | 1 |
Offside Front Front suspension locking device missing |2.5.A.4| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front All position lamps not working |1.1.A.3b| | 1 |
Nearside Front Side repeater not working |1.4.A.2c| | 1 |
Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
Offside Obligatory mirror seriously obscured affecting the rear view |8.1.2a| | 1 |
Nearside Side repeater not working |1.4.A.2c| | 1 |
Stop lamp not working |1.2.1b| | 1 |
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Stop lamp not working both |1.2.1b| | 1 |
Offside Front Lower Front suspension ball joint dust cover missing |2.4.G.2| | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Windscreen washer not working | 1 |
Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Front Lower Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Rear brake application uneven | 1 |
Nearside Rear Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
Bonnet retaining device excessively deteriorated |8.4.2| | 1 |
Front passenger seat insecure |6.2.3| | 1 |