Most common failures | No# failures |
---|
Registration plate lamp issues | 8 |
Nearside Stop lamp not working |1.2.1b| | 4 |
Headlamp aim out of alignment | 4 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 3 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Front brake disc in such a condition that it is seriously weakened | 3 |
Brake pipe excessively corroded | 3 |
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 2 |
Registration plate issues | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Rear fog lamp tell tale not working |1.3.1b| | 2 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Brakes imbalanced across an axle | 2 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 2 |
Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Horn not working |1.6.2a| | 1 |
Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
Offside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 1 |
Direction indicator incorrect colour |1.4.A.2f| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Windscreen wiper blade insecure | 1 |
Nearside Front Lower Body has a projection caused by corrosion |6.1.C.1| | 1 |
Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Front Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Front suspension has excessive movement at a suspension ball joint |2.5.A.1c| | 1 |
Offside Front suspension has excessive movement at a suspension ball joint |2.5.A.1c| | 1 |
Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Emissions not tested |7.0| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Offside Front Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
Offside Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |