Most common failures | No# failures |
---|
Parking brake: efficiency below requirements |3.7.B.7| | 10 |
Rear parking brake recording little or no effort | 8 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
Brake pipe excessively corroded | 8 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
Headlamp aim out of alignment | 6 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
Registration plate lamp issues | 4 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 4 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 3 |
Brakes imbalanced across an axle | 3 |
Windscreen wiper does not clear the windscreen effectively | 3 |
Parking brake lever has no reserve travel |3.1.6b| | 3 |
Rear brake binding | 3 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Service brake: efficiency below requirements |3.7.B.7| | 3 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 2 |
Rear brake application uneven | 2 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Inner Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Inner Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear fog lamp not working |1.3.2b| | 2 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 2 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Brake load sensing valve linkage seized |3.6.E.3| | 2 |
Nearside Steering rack gaiter split |2.2.D.2d| | 2 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Brake hose excessively deteriorated | 2 |
Nearside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Offside Front Torsion bar attachment bracket fractured |2.4.E.4b| | 1 |
Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |
Offside Front front brake binding |3.7.B.1| | 1 |
Nearside Rear Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 1 |
Nearside Seat belt anchorage prescribed area is fractured |5.2.6| | 1 |
Offside Seat belt anchorage prescribed area is fractured |5.2.6| | 1 |
Nearside Rear Seat belt anchorage prescribed area is fractured |5.2.6| | 1 |
Rear Seat belt anchorage prescribed area is fractured |5.2.6| | 1 |
Nearside Rear Upper Suspension spring mounting prescribed area is fractured |2.4.A.3| | 1 |
Offside Rear Upper Suspension spring mounting prescribed area is fractured |2.4.A.3| | 1 |
Nearside Front Upper Suspension spring mounting prescribed area is fractured |2.4.A.3| | 1 |
Nearside Front Suspension spring mounting prescribed area is fractured |2.4.A.3| | 1 |
Offside Front Suspension spring mounting prescribed area is fractured |2.4.A.3| | 1 |
Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Front Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Offside Rear Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Offside Front Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
Nearside Inner Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Registration plate issues | 1 |
Offside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
Brake load sensing valve linkage seized |3.6.E.3| | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Headlamp does not operate immediately when selected on dipped beam |1.7.4a| | 1 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Outer Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Outer Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Outer Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Rear Brake load sensing valve linkage seized |3.6.E.3| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
Nearside Front Headlamp aim headlamp not in good working order adversely affecting beam image |1.2.4b| | 1 |
Offside Front Headlamp aim headlamp not in good working order adversely affecting beam image |1.2.4b| | 1 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Rear Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Brake load sensing valve linkage seized |3.6.E.3| | 1 |
Offside Rear Brake load sensing valve linkage seized |3.6.E.3| | 1 |
Front position lamp|s| not working |1.1.A.3b| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Offside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Centre Rear Statutory seat belt missing |5.1.1| | 1 |
Brake pedal creeps down when held under pressure |3.3.B.1a| | 1 |
Rear Rear fog lamp not working |1.3.2b| | 1 |
Nearside Front Braking system leaking |3.6.A.1| | 1 |
Offside Rear Brake load sensing valve seized |3.6.E.3| | 1 |
Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Brake performance not tested |3.7.A.1| | 1 |
Nearside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Headlamp insecure |1.7.3| | 1 |
Offside Outer Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Horn not working |1.6.2a| | 1 |
Offside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Front Power steering pipe|s| or hose|s| leaking |2.3.3b| | 1 |
Offside Front Wheel stud|s| missing |4.2.A.1e| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Fuel system component leaking |7.2.3| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Side repeater not working |1.4.A.2c| | 1 |
Offside Brake load sensing valve linkage seized |3.6.E.3| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Windscreen has damage | 1 |
Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
Centre Rear Stop lamp not working |1.2.1b| | 1 |
Offside Front Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 1 |
Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 1 |
Nearside Front front brake recording little or no effort |3.7.B.5a| | 1 |
Offside Rear front brake recording little or no effort |3.7.B.5a| | 1 |
Offside Steering rack gaiter split |2.2.D.2d| | 1 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |