| Most common failures | No# failures |
|---|
| Windscreen wiper does not clear the windscreen effectively | 6 |
| Brake pipe excessively corroded | 6 |
| Battery insecure |1.9.1| | 2 |
| Headlamp aim out of alignment | 2 |
| Rear Exhaust system not adequately supported |7.1.1| | 2 |
| Nearside front brake binding |3.7.B.1| | 2 |
| Offside Rear fog lamp not working |1.3.2b| | 2 |
| Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
| Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Rear Brake pipe inadequately supported near tank |3.6.B.1| | 1 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Rear Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
| Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired near side and off side floors,floors to sills and inner sills |6.2.2 |d| |ii|| | 1 |
| Offside Front Position lamp not working |4.2.1 |a|| | 1 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Windscreen washer not working | 1 |
| Suspension component mounting prescribed area is excessively corroded ns and os flooor pan
osr inner sill |2.4.A.3| | 1 |
| Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Nearside Front Service brake excessively binding (1.2.1 (f)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced os centre front and osr inner sill /floor pan (7.1.1 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced ALL front to rear inner sill /outer floor pan (7.1.1 (a) (i)) | 1 |
| Offside Rear fog lamp missing |1.3.2a| | 1 |
| Rear fog lamp switch missing |1.3.1a| | 1 |
| Exhaust system not adequately supported |7.1.1| | 1 |
| Rear fog lamp obviously incorrectly positioned |1.3.2a| | 1 |
| Offside front brake binding |3.7.B.1| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength ns outer floor pan front to rear
nsr inner wheel arch (5.3.6 (a) (i)) | 1 |
| Service brake excessively binding nsr and osr (1.2.1 (f)) | 1 |
| Registration plate lamp issues | 1 |
| Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
| Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front front brake binding |3.7.B.1| | 1 |
| Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Rear Stop lamp not working |1.2.1b| | 1 |
| Rear fog lamp tell tale missing |1.3.1b| | 1 |
| Offside Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Offside Rear fog lamp has less than 50% of the light sources illuminating |1.3.2b| | 1 |
| Registration plate issues | 1 |
| Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |