| Most common failures | No# failures |
|---|
| Brake pipe excessively corroded | 25 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 18 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 17 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 15 |
| Windscreen washer not working | 12 |
| Registration plate lamp issues | 10 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 9 |
| Headlamp aim out of alignment | 9 |
| Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 8 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 7 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 7 |
| Brakes imbalanced across an axle | 7 |
| Windscreen wiper does not clear the windscreen effectively | 6 |
| Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 6 |
| Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 6 |
| Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 6 |
| Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 6 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 6 |
| Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 5 |
| Nearside Parking brake inoperative on one side (1.4.1 (a)) | 5 |
| Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 5 |
| Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 4 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 4 |
| Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h)) | 4 |
| Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 4 |
| Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 4 |
| Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 4 |
| Nearside Rear Parking brake inoperative on one side (1.4.1 (a)) | 4 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 4 |
| Exhaust emissions exceed default limit of 1.5m-1 (8.2.2.2 (b)) | 4 |
| Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 4 |
| Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 4 |
| Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 3 |
| Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 3 |
| Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 3 |
| Anti-lock braking system warning lamp indicates an ABS fault | 3 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| Offside Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
| Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 3 |
| Offside Rear Parking brake inoperative on one side (1.4.1 (a)) | 3 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 3 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 3 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 3 |
| Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
| Offside Front Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 3 |
| Central Prop shaft bearing excessively worn (6.1.7 (b) (i)) | 2 |
| Offside Front Road wheel fixing missing (5.2.1 (a) (i)) | 2 |
| Offside Front Coil spring fractured or broken (5.3.1 (b) (i)) | 2 |
| Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
| Front brake disc in such a condition that it is seriously weakened | 2 |
| Offside Front Shock absorbers has a serious fluid leak | 2 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 2 |
| Nearside Rear Service brake excessively fluctuating (1.2.1 (e)) | 2 |
| Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
| Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
| Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) | 2 |
| Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 2 |
| Oil leaking excessively from engine (8.4.1 (a) (i)) | 2 |
| Offside Rear Rear fog lamp does not face the rear (4.5.4 (a)) | 2 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 2 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 2 |
| Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Rear parking brake recording little or no effort | 2 |
| Offside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
| Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill (5.3.6 (a) (i)) | 2 |
| Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g)) | 2 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 2 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 2 |
| Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i)) | 2 |
| Offside Rear Coil spring fractured or broken (5.3.1 (b) (i)) | 2 |
| Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 2 |
| Nearside Rear Shock absorbers has a serious fluid leak | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 2 |
| Offside Front Position lamp not working |4.2.1 |a|| | 1 |
| Nearside Rear Inner Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f)) | 1 |
| Nearside Rear Suspension component pin or bush excessively worn linkage (5.3.4 (a) (i)) | 1 |
| Drivers door cannot be opened from outside the vehicle (6.2.3 (a)) | 1 |
| Nearside Front Anti-roll bar linkage ball joint excessively worn + dust covers (5.3.4 (a) (i)) | 1 |
| Offside Front Anti-roll bar linkage ball joint excessively worn + dust covers (5.3.4 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i)) | 1 |
| Offside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill holed x 2 locations (6.1.1 (c) (ii)) | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch x 3 locations (6.1.1 (c) (ii)) | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering wheelarch x 3 locations (6.1.1 (c) (ii)) | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill holed (6.1.1 (c) (ii)) | 1 |
| Nearside Front Road wheel fixing missing (5.2.1 (a) (i)) | 1 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i)) | 1 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i)) | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch holed (6.1.1 (c) (i)) | 1 |
| Drivers door cannot be opened from outside the vehicle AND INSIDE (6.2.3 (a)) | 1 |
| Nearside Front Shock absorbers has a serious fluid leak | 1 |
| Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills (5.3.6 (a) (i)) | 1 |
| Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner and outer (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i)) | 1 |
| Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b)) | 1 |
| Rear Exhaust system insecure (6.1.2 (a)) | 1 |
| Emissions not tested (8.2.1.2 (d)) | 1 |
| Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting mid (6.2.2 (d) (i)) | 1 |
| Offside Rear Shock absorbers has a serious fluid leak | 1 |
| Offside Front Shock absorber has a serious fluid leak (2.7.3) | 1 |
| Offside Rear Shock absorber has a serious fluid leak (2.7.3) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (2.7.3) | 1 |
| Nearside Rear Inner Vehicle structure is fractured and structural rigidity is significantly reduced Sill (6.1.1 (a) (i)) | 1 |
| Rear fog lamp tell-tale not working (4.9.1 (a) (ii)) | 1 |
| Offside Rear Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Rear Stop lamp(s) emits other than a steady red light n/s and o/s (4.3.3 (a) (ii)) | 1 |
| Rear Position lamp showing white light to the rear n/s and o/s (4.2.3 (a) (ii)) | 1 |
| Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Nearside Headlamp aim not tested (4.1.2 (b)) | 1 |
| Nearside Front Service brake lagging in operation 42% (1.2.1 (d)) | 1 |
| Spare wheel insecure in carrier (6.1.5 (b) (i)) | 1 |
| Brake performance not tested (1.2.1 (g)) | 1 |
| Brake fluid contaminated (1.8 (a)) | 1 |
| Towbar component excessively corroded (6.1.6 (a)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired In front of rear wheel (6.2.2 (d) (ii)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired In front of rear wheel (6.2.2 (d) (ii)) | 1 |
| Rear Brake cable insecure | 1 |
| Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Rear Suspension component pin or bush excessively worn sway bar bush (5.3.4 (a) (i)) | 1 |
| Emissions not tested due to coolant leak (8.2.2.2 (e)) | 1 |
| Brake load sensing valve inoperative but ABS functioning (1.1.17 (c) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength quarter (5.3.6 (a) (i)) | 1 |
| Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength quarter (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Offside Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Nearside Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i)) | 1 |
| Nearside Front Anti-roll bar ball joint excessively worn droplink (5.3.4 (a) (i)) | 1 |
| Offside Front Anti-roll bar ball joint excessively worn droplink (5.3.4 (a) (i)) | 1 |
| Nearside Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Rear Suspension rod pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Rear Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) | 1 |
| Emissions not tested due too exhaust condition (8.2.2.2 (e)) | 1 |
| Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Exhaust has a major leak of exhaust gases flexible at front (6.1.2 (a)) | 1 |
| Nearside Front Inner Suspension arm pin or bush excessively worn front bush excessively moving (5.3.4 (a) (i)) | 1 |
| Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt both (5.3.4 (b) (ii)) | 1 |
| Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt both (5.3.4 (b) (ii)) | 1 |
| Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Prop shaft bearing excessively worn (6.1.7 (b) (i)) | 1 |
| Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Offside Parking brake inoperative on one side low readings (1.4.1 (a)) | 1 |
| Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 1 |
| Offside Front Upper Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Drivers door cannot be opened from outside the vehicle (6.2.3 (a)) | 1 |
| Offside Drivers door cannot be opened from inside the vehicle (6.2.3 (a)) | 1 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension rod pin or bush likely to become detached (5.3.4 (a) (ii)) | 1 |
| Nearside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Front Exhaust has a major leak of exhaust gases behind heat shield (6.1.2 (a)) | 1 |
| Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 1 |
| Emissions not tested because of leak at front (8.2.2.2 (e)) | 1 |
| Nearside Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i)) | 1 |
| Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction Items hang from mirror (3.1 (a) (ii)) | 1 |
| Offside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Offside Front Steering locking device missing track rod split pin (2.1.3 (d)) | 1 |
| Exhaust on a vehicle fitted with a diesel particulate filter emits visible smoke of any colour (8.2.2.2 (d)) | 1 |
| Brake pedal has insufficient reserve travel brake pedal pumps up (1.1.2 (a)) | 1 |
| Offside Rear Outer Passengers seat insecure (6.2.6 (a) (ii)) | 1 |
| Nearside Front Upper Anti-roll bar ball joint dust cover missing (5.3.4 (b) (ii)) | 1 |
| Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Offside Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i)) | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Prop shaft bearing excessively worn as marked (6.1.7 (b) (i)) | 1 |
| Nearside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Shock absorbers has an excessively worn bush Both rears lower bushes (5.3.2 (c)) | 1 |
| Offside Headlamp not working on main beam (1.7.5a) | 1 |
| Offside rear parking (secondary) brakes imbalanced Slow , low 66% imbalance (3.7.B.6b) | 1 |
| Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2) | 1 |
| Shock absorber has a serious fluid leak Both rear (2.7.3) | 1 |
| Offside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2) | 1 |
| Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2) | 1 |
| Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2) | 1 |
| Nearside Steering rack gaiter split (2.2.D.2d) | 1 |
| Offside Steering rack gaiter split (2.2.D.2d) | 1 |
| Parking brake: efficiency below requirements (3.7.C.1b) | 1 |
| Offside Front position lamp(s) not working (1.1.A.3b) | 1 |
| Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2) | 1 |
| Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2) | 1 |
| Parking brake: efficiency below requirements (3.7.B.7) | 1 |
| Offside Front Upper Macpherson strut attachment bracket/mounting insecure and impairing directional stability (5.3.3 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear wheel arch (5.3.6 (a) (i)) | 1 |
| Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b)) | 1 |
| Exhaust has a major leak of exhaust gases Rear box (6.1.2 (a)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill and sill end cap (5.3.6 (a) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Rear Rear fog lamp missing (4.5.1 (a) (ii)) | 1 |
| Rear fog lamp light intensity significantly reduced (4.5.4 (a)) | 1 |
| Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Nearside Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Steering rack has excessive free play detected at the steering wheel (steering rack fitted) (2.3 (a) (i)) | 1 |
| Offside Rear reflector reflecting white to the rear (4.8.2 (a) (ii)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Outer Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Emissions unable to be completed (8.2.2.2 (e)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER AND OUTER SILLS MARKED WITH CHALK (6.1.1 (c) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill (6.2.2 (d) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle location bracket (5.3.6 (a) (i)) | 1 |
| Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill various locations (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Road wheel more than one fixing missing X 1 (5.2.1 (a) (ii)) | 1 |
| Offside Rear Road wheel more than one fixing missing X 2 (5.2.1 (a) (ii)) | 1 |
| Rear Service brake lagging in operation X 2 (1.2.1 (d)) | 1 |
| Nearside Rear Bumper insecure (6.1.4 (a) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases Exhaust broken off (6.1.2 (a)) | 1 |
| Offside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill front and rear (6.2.2 (d) (i)) | 1 |
| Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Nearside Front Upper Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill front and rear (6.2.2 (d) (i)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Fuel cap/sealing device missing (6.1.3 (b) (i)) | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 1 |
| Nearside Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Offside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill panel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill panel (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill panel (6.1.1 (c) (i)) | 1 |
| Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill panel (6.1.1 (c) (i)) | 1 |
| Nearside Front Lower Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Speedometer clearly inoperative (7.8 (b) (ii)) | 1 |
| Offside Front Macpherson strut top bush or bearing has excessive wear or free play (5.3.4 (a) (i)) | 1 |
| Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced -offside outer sill (marked in yellow chalk) (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced -nearside outer sill (marked in yellow chalk) (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced -offside inner sill (marked in yellow chalk) (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced -rear of offside inner sill/inner wheel arch (marked in yellow chalk) (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced -nearside inner sill (marked in yellow chalk) (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced -offside front chassis (marked in yellow chalk) (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced -offside rear inner wheel arch (marked in yellow chalk) (6.1.1 (c) (i)) | 1 |
| Offside Rear Passengers seat insecure furthest back. (6.2.6 (a) (ii)) | 1 |
| Nearside Rear Inner Vehicle structure inadequately repaired such that structural rigidity is significantly reduced sill. (6.1.1 (d) (i)) | 1 |
| Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill. (6.2.2 (d) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer sills (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Road wheel fixing missing (5.2.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage loose (7.1.1 (b)) | 1 |
| Brake performance unable to be tested (1.2.1 (g)) | 1 |
| Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner/outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Service brake excessively binding (1.2.1 (f)) | 1 |
| Shock absorbers has a serious fluid leak nsr (5.3.2 (b)) | 1 |
| Anti-roll bar linkage pin or bush excessively worn osf link (5.3.4 (a) (i)) | 1 |
| Suspension arm ball joint excessively worn ns and os front (5.3.4 (a) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced nsr inner sill (6.1.1 (c) (i)) | 1 |
| Anti-roll bar pin or bush excessively worn nsf d bush (5.3.4 (a) (i)) | 1 |
| Registration plate issues | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced OFFSIDE FRONT INNER SILL (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced INNER SILL (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced CENTRESILL (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER WHEEL ARCH (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER WHEEL ARCH (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Offside Rear Steering column flexible coupling is excessively deteriorated (2.2.2 (c)) | 1 |
| Rear Exhaust has a major leak of exhaust gases back box (6.1.2 (a)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Rear Parking brake inoperative on one side both (1.4.1 (a)) | 1 |
| Nearside Rear Inner Steering component mounting prescribed area is excessively corroded sill area (2.1.2 (e) (i)) | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i)) | 1 |
| Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction Items removed from mirror (3.1 (a) (ii)) | 1 |
| Nearside Rear Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Offside Rear Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill holed (6.1.1 (c) (i)) | 1 |
| Rear Anti-roll bar ball joint excessively worn both (5.3.4 (a) (i)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn both (5.3.4 (a) (i)) | 1 |
| Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 1 |
| Nearside Front Lower Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Nearside Rear Lower Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Front Lower Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Rear Lower Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Central Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear crossmember corroded (6.2.2 (d) (i)) | 1 |
| Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger (5.3.6 (a) (i)) | 1 |
| Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre to rear inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill/inner wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill/inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Rear Parking brake lever inoperative (1.1.6 (d)) | 1 |
| Rear fog lamp switch not operating in accordance with the requirements (4.5.3 (a)) | 1 |
| Offside Rear Inner Integral body structure is fractured and structural rigidity is significantly reduced sill (6.1.1 (a) (i)) | 1 |
| Nearside Rear Inner Integral body structure is fractured and structural rigidity is significantly reduced sill (6.1.1 (a) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch within 30cms of brake pipe bracket (6.1.1 (c) (i)) | 1 |
| Rear Brake load sensing valve inoperative and ABS not fitted or inoperative (1.1.17 (c) (ii)) | 1 |
| Nearside Rear Other passenger door cannot be opened from outside the vehicle (6.2.3 (a)) | 1 |
| Spare wheel carrier insecure (6.1.5 (a)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i)) | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i)) | 1 |
| Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i)) | 1 |
| Nearside Front Hydraulic brake cylinder leaking hydraulic fluid (1.1.16 (b) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill to sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn front bush worn or loose (5.3.4 (a) (i)) | 1 |
| Brake lever has abnormal movement of levers indicating excessive wear or maladjustment Park brake (1.1.15 (f)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Nearside Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Various prescribed areas [as marked] (6.1.1 (c) (i)) | 1 |
| Offside Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Various prescribed areas [as marked] (6.1.1 (c) (i)) | 1 |
| Nearside Rear Anti-roll bar linkage ball joint excessively worn droplink (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar linkage ball joint excessively worn droplink (5.3.4 (a) (i)) | 1 |