| Most common failures | No# failures |
|---|
| Brake pipe excessively corroded | 43 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 29 |
| Windscreen wiper does not clear the windscreen effectively | 18 |
| Windscreen washer not working | 17 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 15 |
| Brakes imbalanced across an axle | 12 |
| Headlamp aim out of alignment | 12 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 11 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 10 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 8 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 8 |
| Registration plate lamp issues | 7 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 7 |
| Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 7 |
| Registration plate issues | 7 |
| Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 6 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 6 |
| Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 6 |
| Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 6 |
| Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 6 |
| Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 6 |
| Offside Front Coil spring fractured or broken (5.3.1 (b) (i)) | 5 |
| Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 5 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 5 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 5 |
| Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g)) | 5 |
| Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 5 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 4 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 4 |
| Offside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 4 |
| Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 4 |
| Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 4 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 4 |
| Nearside Front Service brake excessively binding (1.2.1 (f)) | 4 |
| Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 4 |
| Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h)) | 4 |
| Nearside Front Coil spring fractured or broken (5.3.1 (b) (i)) | 3 |
| Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 3 |
| Anti-lock braking system warning lamp indicates an ABS fault | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i)) | 3 |
| Offside Rear Parking brake inoperative on one side (1.4.1 (a)) | 3 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 3 |
| Brake pedal has insufficient reserve travel (1.1.2 (a)) | 3 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 3 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 3 |
| Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 3 |
| Central Prop shaft bearing excessively worn (6.1.7 (b) (i)) | 3 |
| Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 3 |
| Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 3 |
| Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 3 |
| Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 3 |
| Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) | 3 |
| Rear Exhaust system insecure (6.1.2 (a)) | 3 |
| Offside Front Service brake excessively fluctuating (1.2.1 (e)) | 3 |
| Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 3 |
| Nearside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i)) | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Rear fog lamp not working |1.3.2b| | 2 |
| Parking brake: efficiency below requirements |3.7.B.7| | 2 |
| Rear Service brake excessively fluctuating (1.2.1 (e)) | 2 |
| Horn not working (7.7 (a)) | 2 |
| Offside Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i)) | 2 |
| Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 2 |
| Rear fog lamp does not face the rear (4.5.4 (a)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 2 |
| Parking brake: efficiency below requirements (3.7.B.7) | 2 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 2 |
| Exhaust emissions exceed default limit of 1.5m-1 (8.2.2.2 (b)) | 2 |
| Offside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 2 |
| Offside Rear Rear fog lamp missing (4.5.1 (a) (ii)) | 2 |
| Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
| Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 2 |
| Nearside Rear Road wheel fixing missing (5.2.1 (a) (i)) | 2 |
| Offside Rear Road wheel fixing missing (5.2.1 (a) (i)) | 2 |
| Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 2 |
| Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer rear sill (5.3.6 (a) (i)) | 2 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 2 |
| Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
| Nearside Rear Parking brake inoperative on one side (1.4.1 (a)) | 2 |
| Offside Steering rack gaiter split (2.2.D.2d) | 2 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
| Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 2 |
| Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 2 |
| Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 2 |
| Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 2 |
| Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Nearside Front Service brake excessively fluctuating (1.2.1 (e)) | 2 |
| Central Rear Seat belt buckle not functioning as intended (7.1.2 (d)) | 2 |
| Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 2 |
| Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 2 |
| Rear fog lamp tell tale not working (1.3.1b) | 2 |
| Anti-lock braking system warning lamp does not illuminate (1.6 (a)) | 2 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 2 |
| Front Exhaust has a major leak of exhaust gases flexy pipe (6.1.2 (a)) | 2 |
| Service brake: efficiency below requirements |3.7.C.1a| | 1 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Headlamp aim not tested |1.8.A.1c| | 1 |
| Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Nearside Front front brake binding |3.7.B.1| | 1 |
| Offside Front front brake binding |3.7.B.1| | 1 |
| Exhaust emits an excessive level of metered smoke |7.4.B.3a| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill and box section |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is severely distorted box section/ outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wing above chassis |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
| Rear brake application uneven | 1 |
| Front Battery insecure |1.9.1| | 1 |
| Nearside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Rear Brake pipe inadequately supported |3.6.B.1| | 1 |
| Rear brake binding | 1 |
| Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Rear fog lamp tell tale not working |1.3.1b| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Rear parking brake recording little or no effort | 1 |
| Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
| Rear fog lamp tell tale missing |1.3.1b| | 1 |
| Rear fog lamp missing |1.3.2a| | 1 |
| Nearside Front Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Front Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Engine MIL inoperative or indicates a malfunction |8.2.2.2 |g|| | 1 |
| Nearside Front Bumper damaged and likely to cause injury when grazed or contacted |6.1.4 |a| |i|| | 1 |
| Nearside Front Position lamp not working |4.2.1 |a|| | 1 |
| Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner + outer sill (5.3.6 (a) (i)) | 1 |
| Offside Front Anti-roll bar linkage missing (5.3.3 (a) (ii)) | 1 |
| Nearside Front Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Fuel cap/sealing device missing (6.1.3 (b) (i)) | 1 |
| Exhaust has a major leak of exhaust gases Front flexi (6.1.2 (a)) | 1 |
| Central Prop shaft bearing housing insecure (6.1.7 (f) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Supplementary restraint system warning lamp indicates a fault (7.1.6 (a)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting in front of rear arch (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting in front of rear arch (6.2.2 (d) (i)) | 1 |
| Nearside Front Anti-roll bar linkage ball joint dust cover missing (5.3.4 (b) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill x2 (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Obligatory mirror missing (3.3 (a)) | 1 |
| Offside Rear Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength undersill (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected outersill (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected outersill (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outersill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Service brake lagging in operation (1.2.1 (d)) | 1 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill middle (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 1 |
| Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Central Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction (3.1 (a) (ii)) | 1 |
| Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced front two rows outer seatbelts
inside rear wheel arch and inner sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Brake pipe excessively damaged across axle (1.1.11 (c)) | 1 |
| Offside Front Brake prescribed area is excessively corroded inner flitch (1.1.21 (e) (i)) | 1 |
| Nearside Rear Outer Suspension component pin or bush excessively worn panard rod (5.3.4 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Front brake application uneven | 1 |
| front brakes release unevenly (3.7.B.4) | 1 |
| Nearside front brake binding (3.7.B.1) | 1 |
| Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2) | 1 |
| Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3) | 1 |
| rear brake recording little or no effort (3.7.B.5a) | 1 |
| Offside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Undersill section (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Undersill section (5.3.6 (a) (i)) | 1 |
| Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel both (1.3.1 (a) (i)) | 1 |
| Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Offside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Brake load sensing valve seized but ABS functioning (1.1.17 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor corroded (5.3.6 (a) (i)) | 1 |
| Nearside Rear Body component corroded and likely to cause injury WHEEL ARCH (6.2.1 (a) (i)) | 1 |
| Offside Front Body component damaged and likely to cause injury BUMPER (6.2.1 (a) (i)) | 1 |
| Offside Rear Body component corroded and likely to cause injury wheel arch (6.2.1 (a) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Nearside Rear Shock absorbers has an excessively worn bush (5.3.2 (c)) | 1 |
| Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under sill (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under sill (6.2.2 (d) (i)) | 1 |
| Nearside Front Coil spring fractured or broken spring coiling down strut and could damage link arm or brake hose. (5.3.1 (b) (i)) | 1 |
| Offside Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Central Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Outer Body panel damaged and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Seat belt not functioning as intended (7.1.2 (c)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected outer sill /wheel arch (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected outer sill /wheel arch (5.3.6 (a) (ii)) | 1 |
| Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction (3.1 (a) (ii)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn Both D bushes (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Rear Inner Vehicle structure excessively corroded within 30cm of towbar mounting quarter (6.1.6 (i) (i)) | 1 |
| Offside Rear Inner Vehicle structure excessively corroded within 30cm of towbar mounting quarter (6.1.6 (i) (i)) | 1 |
| Brake hose excessively deteriorated | 1 |
| Emissions not tested engine smoking (8.2.2.2 (e)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill seam not welded (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired outer sill (5.3.6 (a) (i)) | 1 |
| Prop shaft joint excessively worn 4x4 transfer box (6.1.7 (c) (i)) | 1 |
| Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired outer sill (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired inner sill (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Front Front suspension has excessive play in a lower suspension ball joint both (2.5.B.1a) | 1 |
| Nearside Stop lamp not working (1.2.1b) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength area (5.3.6 (a) (i)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Front cross member (6.1.1 (c) (i)) | 1 |
| Nearside Coil spring fractured or broken (5.3.1 (b) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting NEAR JACKING POINT (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting NEAR JACKING POINT (6.2.2 (d) (i)) | 1 |
| Nearside Rear Exhaust emissions likely to be affected by an exhaust leak JOINT LEAK (8.2.2.1 (b)) | 1 |
| Emissions not tested (8.2.2.2 (e)) | 1 |
| Nearside Rear Shock absorbers has a serious fluid leak | 1 |
| Offside Rear Outer Body panel corroded and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Nearside Rear Outer Body panel corroded and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases silencer centre system missing (6.1.2 (a)) | 1 |
| Exhaust fumes entering cabin (6.1.2 (b) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 1 |
| Rear Rear fog lamp switch inoperative (4.5.3 (a)) | 1 |
| Nearside Rear Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Rear Inner Anti-roll bar has excessive play in a pin/bush (2.4.G.2) | 1 |
| Offside Rear Inner Anti-roll bar has excessive play in a pin/bush (2.4.G.2) | 1 |
| Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2) | 1 |
| Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength back of sill (5.3.6 (a) (i)) | 1 |
| Windscreen damaged and affecting the drivers view of the road (3.2 (a) (ii)) | 1 |
| Central Rear Seat belt not functioning as intended (7.1.2 (c)) | 1 |
| Nearside Rear Integral body structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 1 |
| Offside Rear Integral body structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 1 |
| Nearside Inner Integral body structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced centre sill corroded (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and sill backing (5.3.6 (a) (i)) | 1 |
| Offside Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i)) | 1 |
| Offside Front Lower Suspension arm ball joint excessively worn and gaiter split (5.3.4 (a) (i)) | 1 |
| Rear Seat belt buckle missing (7.1.2 (d)) | 1 |
| Rear Passengers seat insecure (6.2.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component pin or bush excessively worn axle bush (5.3.4 (a) (i)) | 1 |
| Nearside Rear Suspension arm attachment bracket/mounting corroded and seriously weakened inner sill (5.3.3 (b) (i)) | 1 |
| Offside Rear Suspension arm attachment bracket/mounting corroded and seriously weakened inner sill (5.3.3 (b) (i)) | 1 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill corroded *2 (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Brake performance not tested due to vehicle condition (1.2.1 (g)) | 1 |
| Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Wheel Arch (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Wheel Arch (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill panel (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill- floor (5.3.6 (a) (i)) | 1 |
| Nearside Rear Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill - marked in yellow chalk (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill - marked in yellow chalk (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Rear fog lamp missing (4.5.1 (a) (ii)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Power steering component leaking At rack (2.1.5 (a)) | 1 |
| Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced both / outer sill (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Rear fog lamp missing (4.5.1 (a) (ii)) | 1 |
| Rear Brake load sensing valve seized but ABS functioning (1.1.17 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Rear Suspension arm pin or bush likely to become detached (5.3.4 (a) (ii)) | 1 |
| Front Brake pipe excessively damaged front to back pipe (1.1.11 (c)) | 1 |
| Power steering inoperative and steering adversely affected (2.1.5 (c) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill within 30 cm of spring mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill within 30 cm of spring mount. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength drop sill (5.3.6 (a) (i)) | 1 |
| Offside Front Road wheel more than one fixing missing (5.2.1 (a) (ii)) | 1 |
| Front Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt missing not fitted (7.1.2 (a)) | 1 |
| Offside Rear Seat belt missing not fitted (7.1.2 (a)) | 1 |
| Front Electrical wiring insecure and in contact with sharp edges power cable from battery under bonnet (4.11 (a) (ii)) | 1 |
| Nearside Front Outer Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Offside Front Outer Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn D shape bush (5.3.4 (a) (i)) | 1 |
| Windscreen excessively tinted and visibility through swept area of windscreen seriously affected (3.2 (b) (ii)) | 1 |
| Offside Front Macpherson strut ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill holed (6.2.2 (d) (i)) | 1 |
| Central Prop shaft bearing likely to break up (6.1.7 (b) (ii)) | 1 |
| Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area fractured significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced underside sill area in 2 places (7.1.1 (a) (i)) | 1 |
| Nearside Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced rear wheel arch, front next to sill (7.1.1 (a) (i)) | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front cross member (5.3.6 (a) (i)) | 1 |
| Parking brake lever defective so that it cannot be satisfactorily operated rubber missing (1.1.6 (d)) | 1 |
| Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
| Offside Front Headlamp aim not tested (4.1.2 (b)) | 1 |
| Nearside Rear Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i)) | 1 |
| Nearside Front Headlamp not working on dipped beam (1.7.5a) | 1 |
| Offside Rear Parking brake is not capable of being maintained in operation by direct mechanical action only (3.1.2) | 1 |
| Rear Rear fog lamp not working (1.3.2b) | 1 |
| Nearside Front Main beam tell-tale not working (1.7.4c) | 1 |
| Offside Front Main beam tell-tale not working (1.7.4c) | 1 |
| Rear fog lamp not working (1.3.2b) | 1 |
| Nearside Steering rack gaiter split (2.2.D.2d) | 1 |
| Nearside Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Passengers seat insecure (6.2.6 (a) (ii)) | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn wishbone front bush (5.3.4 (a) (i)) | 1 |
| Nearside Rear Inner Anti-roll bar pin or bush excessively worn d bush (5.3.4 (a) (i)) | 1 |
| Offside Rear Inner Anti-roll bar pin or bush excessively worn d bush (5.3.4 (a) (i)) | 1 |
| Nearside Front Upper Anti-roll bar ball joint dust cover missing (5.3.4 (b) (ii)) | 1 |
| Nearside Front Lower Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Seal (6.2.2 (d) (i)) | 1 |
| Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Seal (6.2.2 (d) (i)) | 1 |
| Nearside Front Lower Steering linkage ball joint ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 1 |
| Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt linkbar dust boot split (5.3.4 (b) (ii)) | 1 |
| Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt linkbar dust boot split (5.3.4 (b) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill in 2 places (5.3.6 (a) (i)) | 1 |
| Nearside Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i)) | 1 |
| Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i)) | 1 |
| Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Emissions unable to be completed due to noise from engine/cooling fan adrift (8.2.1.2 (d)) | 1 |
| Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 1 |
| Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting to front end of Sill to jack point/outrigger . See Chalk (6.2.2 (d) (i)) | 1 |
| Nearside Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting centre of inner sill . see chalk (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Suspension arm pin or bush excessively worn rear bush to lower arm see chalk (5.3.4 (a) (i)) | 1 |
| Offside Front Inner Suspension arm pin or bush excessively worn rear bush to lower arm see chalk (5.3.4 (a) (i)) | 1 |
| Nearside Obligatory mirror insecure (3.3 (b) (ii)) | 1 |
| Offside Obligatory mirror insecure (3.3 (b) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension arm pin or bush excessively worn large (5.3.4 (a) (i)) | 1 |
| Nearside Rear Suspension arm pin or bush excessively worn small (5.3.4 (a) (i)) | 1 |
| Position lamp not working all (4.2.1 (a) (ii)) | 1 |
| Power steering component leaking (2.1.5 (a)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Nearside Rear Seat belt anchorage loose (7.1.1 (b)) | 1 |
| Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i)) | 1 |
| Offside Rear Coil spring fractured or broken (5.3.1 (b) (i)) | 1 |
| Offside Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting jacking point (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Front Headlamp aim unable to be tested both side (4.1.2 (b)) | 1 |
| Offside Front Outer Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Front Headlamp not working on main beam n/s and o/s (4.1.1 (a) (ii)) | 1 |
| Nearside Rear Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii)) | 1 |
| Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen Both front (3.5 (a)) | 1 |
| Nearside Front Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
| Wheel bearing has excessive play Both front (5.1.3 (a) (i)) | 1 |
| Nearside Rear Suspension arm pin or bush excessively worn Arm left hand bush (5.3.4 (a) (i)) | 1 |
| Front Exhaust has a major leak of exhaust gases flexy (6.1.2 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill near suspension mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner sill near suspension mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Seat belt buckle not functioning as intended (7.1.2 (d)) | 1 |
| Offside Front Outer Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Shock absorbers has an excessively worn bush both bushes (5.3.2 (c)) | 1 |
| Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced rear inner sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced rear outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced rear outer sill (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer sills (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer sills (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Trailing arm (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Trailing arm (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Panhard rod (5.3.6 (a) (i)) | 1 |
| Nearside Front Body panel corroded and likely to cause injury Outer wing (6.2.1 (a) (i)) | 1 |
| Seat belt buckle not functioning as intended ALL rear buckles not functioning (7.1.2 (d)) | 1 |
| Offside Front Road wheel fixing missing (5.2.1 (a) (i)) | 1 |
| Central Prop shaft flexible coupling excessively deteriorated (6.1.7 (d) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER AND OUTER SILL (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER AND OUTER SILL (5.3.6 (a) (i)) | 1 |
| Parking brake lever has excessive movement indicating incorrect adjustment Foot park brake to floor - NO RESERVE TRAVEL and Parkbrake ONLY JUST MET MINIMUM REQUIREMENTS OF 16% (1.1.6 (c)) | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Inner sil has multiple holes, all marked with yellow chalk (6.2.2 (d) (i)) | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Inner sil has multiple holes, all marked with yellow chalk (6.2.2 (d) (i)) | 1 |
| Rear fog lamp lens defective such that emitted light is adversely affected (4.5.1 (b) (ii)) | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Rear fog lamp obviously incorrectly positioned (4.5.4 (a)) | 1 |
| Rear fog lamp does not emit a steady red light unit damaged (4.5.4 (a)) | 1 |
| Offside Front Suspension arm ball joint excessively worn when weight is on it (5.3.4 (a) (i)) | 1 |
| Nearside Rear Suspension arm pin or bush excessively worn stabilizer bar bush worn (5.3.4 (a) (i)) | 1 |
| Offside Front Lower Suspension arm ball joint excessively worn ball joint worn (5.3.4 (a) (i)) | 1 |
| Oil leaking excessively from engine (8.4.1 (a) (i)) | 1 |
| Nearside Front Shock absorbers has a serious fluid leak | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced 3 HOLES CLOSE TO EACH OTHER (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Vehicle structure inadequately repaired such that structural rigidity is significantly reduced sill (6.1.1 (d) (i)) | 1 |
| Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |