| Most common failures | No# failures |
|---|
| Brake pipe excessively corroded | 30 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 24 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 20 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 15 |
| Windscreen washer not working | 15 |
| Windscreen wiper does not clear the windscreen effectively | 10 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 8 |
| Brakes imbalanced across an axle | 8 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 8 |
| Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 6 |
| Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 6 |
| Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 6 |
| Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 6 |
| Headlamp aim out of alignment | 6 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 6 |
| Registration plate lamp issues | 5 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 5 |
| Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 5 |
| Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 5 |
| Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 4 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 4 |
| Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 4 |
| Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 4 |
| Anti-lock braking system warning lamp indicates an ABS fault | 4 |
| Registration plate issues | 3 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 3 |
| Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g)) | 3 |
| Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 3 |
| Offside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 3 |
| Central Prop shaft bearing excessively worn (6.1.7 (b) (i)) | 3 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 3 |
| Offside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 3 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i)) | 3 |
| Nearside Parking brake inoperative on one side (1.4.1 (a)) | 3 |
| Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 3 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 3 |
| Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 3 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 3 |
| Horn not working (7.7 (a)) | 2 |
| Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 2 |
| Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 2 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 2 |
| Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 2 |
| Nearside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 2 |
| Offside Rear Service brake excessively fluctuating (1.2.1 (e)) | 2 |
| Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 2 |
| Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Nearside Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 2 |
| Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
| Rear fog lamp missing (4.5.1 (a) (ii)) | 2 |
| Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 2 |
| Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 2 |
| Offside Rear Rear fog lamp missing (4.5.1 (a) (ii)) | 2 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 2 |
| Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Front Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b)) | 2 |
| Rear fog lamp tell-tale not working (4.9.1 (a) (ii)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 2 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 2 |
| Offside Parking brake inoperative on one side (1.4.1 (a)) | 2 |
| Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 2 |
| Power steering malfunctioning (2.1.5 (a)) | 2 |
| Power steering pipe/hose leaking (2.1.5 (a)) | 2 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 2 |
| Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f)) | 2 |
| Stop lamp(s) all not working (4.3.1 (a) (iii)) | 2 |
| Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 2 |
| Offside Front Outer Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 2 |
| Offside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
| Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Front Steering rack gaiter split |2.2.D.2d| | 1 |
| Offside Front Steering rack gaiter split |2.2.D.2d| | 1 |
| Offside Rear Stop lamp not working |1.2.1b| | 1 |
| Offside Inner Rear Stop lamp not working |1.2.1b| | 1 |
| Offside Rear fog lamp not working |1.3.2b| | 1 |
| Nearside Front Upper Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Front Lower Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
| Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Nearside Rear Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
| Offside Steering rack gaiter split |2.2.D.2d| | 1 |
| Centre Rear Seat belt retracting mechanism defective |5.2.5b| | 1 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting OUTER SILL/DOOR STEP (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting INNER SILL AND CENTRAL (6.2.2 (d) (i)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn ANTI ROLL D BUSH (5.3.4 (a) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill area (6.2.2 (d) (i)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Offside Windscreen damaged and affecting the drivers view of the road (3.2 (a) (ii)) | 1 |
| Nearside Rear Body component damaged and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn both d bushes (5.3.4 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill (5.3.6 (a) (ii)) | 1 |
| Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases flexy joint (6.1.2 (a)) | 1 |
| Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h)) | 1 |
| Nearside Rear Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Offside Rear Road wheel fixing missing (5.2.1 (a) (i)) | 1 |
| Nearside Front Steering locking device missing lower ball joint split pin missing (2.1.3 (d)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill area (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch area (5.3.6 (a) (i)) | 1 |
| Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill area, multiple areas (7.1.1 (a) (i)) | 1 |
| Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Cross member (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Exhaust emissions exceed manufacturers specified limit (8.2.2.2 (a)) | 1 |
| Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 1 |
| Offside Rear Parking brake inoperative on one side READINGS LOW (1.4.1 (a)) | 1 |
| Front Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Prop shaft bearing excessively worn CENTRE BEARING (6.1.7 (b) (i)) | 1 |
| Nearside Rear Outer Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Rear Upper Shock absorbers has an excessively worn bush (5.3.2 (c)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) | 1 |
| Rear Exhaust has a major leak of exhaust gases back box snapped (6.1.2 (a)) | 1 |
| Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near outrigger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i)) | 1 |
| Offside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i)) | 1 |
| Brake lever has insufficient reserve travel park brake (1.1.2 (a)) | 1 |
| Offside Rear Seat belt buckle not functioning as intended center belt (7.1.2 (d)) | 1 |
| Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Central Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i)) | 1 |
| Brake load sensing valve linkage defective and function impaired sezed (1.1.17 (a)) | 1 |
| Offside Rear Body component corroded and likely to cause injury arch (6.2.1 (a) (i)) | 1 |
| Rear Seat belt missing (7.1.2 (a)) | 1 |
| Nearside Rear Lower Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Rear Outer Suspension rod pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill underside (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front outrigger (5.3.6 (a) (i)) | 1 |
| Position lamp showing white light to the rear both rear (4.2.3 (a) (ii)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Lower Suspension arm pin or bush excessively worn Front bush (5.3.4 (a) (i)) | 1 |
| Suspension component pin or bush excessively worn Rear axle watts link bush (5.3.4 (a) (i)) | 1 |
| Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL CORRODED (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength REAR INNER SILL CORRODED (5.3.6 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases FRONT FLEXABLE (6.1.2 (a)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill / chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i)) | 1 |
| Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension arm pin or bush excessively worn Control arm (5.3.4 (a) (i)) | 1 |
| Nearside Front Direction indicator incorrect colour Shows wight light below indicator (4.4.3 (a)) | 1 |
| Offside Front Direction indicator incorrect colour Shows wight light below indicator (4.4.3 (a)) | 1 |
| Anti-lock braking system warning lamp does not illuminate (1.6 (a)) | 1 |
| Steering system excessively rough (2.1.1 (a)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired Plate not welded correctly there is two separate plate (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is inadequately repaired Outer sill has filler (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Offside Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 1 |
| Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength suspension turret (5.3.6 (a) (i)) | 1 |
| Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (split) (2.1.3 (g) (ii)) | 1 |
| Parking brake inoperative on one side (Nearside) (1.4.1 (a)) | 1 |
| Central Prop shaft flexible coupling so deteriorated it is likely to fail (6.1.7 (d) (ii)) | 1 |
| Offside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Prop shaft flexible coupling excessively deteriorated centre (6.1.7 (d) (i)) | 1 |
| Front Exhaust has a major leak of exhaust gases flexi (6.1.2 (a)) | 1 |
| Nearside Fuel pipe insecure heater supply fuel line hanging down (6.1.3 (a) (i)) | 1 |
| Offside Rear Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Offside Windscreen in an unacceptable condition cracked across swept area (3.2 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and inside wheelarch (5.3.6 (a) (i)) | 1 |
| Offside Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Power steering component leaking at pinion (2.1.5 (a)) | 1 |
| Offside Front Brake disc significantly and obviously worn inner face (1.1.14 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill all marked yellow (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area is inadequately repaired behind rear wheel corroded, incomplete welds to existing repair and panels split (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced behind n/s/r wheel corroded and holed (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Central Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Rear fog lamp likely to become detached (4.5.1 (c) (ii)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Brake disc fractured (1.1.14 (a) (ii)) | 1 |
| Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Brake performance not tested (1.2.1 (g)) | 1 |
| Offside Front Anti-lock braking system wiring excessively damaged (1.6 (d)) | 1 |
| Offside Front Anti-roll bar linkage fractured (5.3.3 (b) (ii)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn x2 (5.3.4 (a) (i)) | 1 |
| Nearside Rear Outer Body panel corroded and likely to cause injury sill (6.2.1 (a) (i)) | 1 |
| Nearside Rear Inner Body panel corroded and likely to cause injury sill (6.2.1 (a) (i)) | 1 |
| Nearside Body component corroded and likely to cause injury middel inner sill (6.2.1 (a) (i)) | 1 |
| Offside Rear Inner Body panel corroded and likely to cause injury sill (6.2.1 (a) (i)) | 1 |
| Offside Front Inner Body panel corroded and likely to cause injury sill (6.2.1 (a) (i)) | 1 |
| Offside Front Shock absorbers has a serious fluid leak | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/ lower arch (5.3.6 (a) (i)) | 1 |
| Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL IN SEVARAL SECTIONS (6.2.2 (d) (i)) | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL IN SEVARAL SECTIONS (6.2.2 (d) (i)) | 1 |
| Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL IN SEVARAL SECTIONS (6.2.2 (d) (i)) | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL IN SEVARAL SECTIONS (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting CHASIS OUTER SECTION BELOW DRIVERS FOOTWELL (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension arm pin or bush excessively worn SILL IN SEVARAL SECTIONS (5.3.4 (a) (i)) | 1 |
| Offside Rear Suspension arm pin or bush excessively worn STABLIZAR ARM BUSH (5.3.4 (a) (i)) | 1 |
| Battery insecure and likely to cause a short circuit both (4.13 (a) (ii)) | 1 |
| Drivers door hinge insecure (6.2.3 (c) (ii)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn d bush (5.3.4 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases flexi (6.1.2 (a)) | 1 |
| Rear Exhaust has a major leak of exhaust gases joint (6.1.2 (a)) | 1 |
| Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Parking brake inoperative on one side both sides (1.4.1 (a)) | 1 |
| Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill/chassis (7.1.1 (a) (i)) | 1 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outrigger/chassis (6.2.2 (d) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Brake lever has insufficient reserve travel park brake pedal (1.1.2 (a)) | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Spare wheel insecure in carrier (6.1.5 (b) (i)) | 1 |
| Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Seat belt retracting mechanism defective (7.1.2 (e)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Rear Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting (6.1.6 (i) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting central inner sill, within 30cm on passenger seat mounting (6.2.2 (d) (i)) | 1 |
| Engine MIL inoperative or indicates a malfunction and cutting out (8.2.1.2 (h)) | 1 |
| Offside Front Inner Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Stop lamp(s) remains on when the brakes are released (4.3.2 (a) (iii)) | 1 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Power steering component leaking (2.1.5 (a)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Anti-roll bar linkage insecure and impairing directional stability insecure (5.3.3 (a) (ii)) | 1 |
| Central Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Power steering component leaking Steering rack (2.1.5 (a)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill to floor (6.1.1 (c) (i)) | 1 |
| Central Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced offside sill to floor (6.1.1 (c) (i)) | 1 |
| Offside Rear Bumper likely to become detached (6.1.4 (a) (ii)) | 1 |
| Nearside Rear Lower Shock absorbers has an excessively worn bush (5.3.2 (c)) | 1 |
| Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill - trailing arm (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill - trailing arm (5.3.6 (a) (i)) | 1 |
| Parking brake inoperative on one side BOTH sides (1.4.1 (a)) | 1 |
| Nearside Track rod end modification unsafe split pin missing (2.1.3 (f) (i)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 1 |
| Electrical wiring insulation in such a condition there is an imminent risk of fire or formation of sparks (4.11 (c) (iii)) | 1 |
| Nearside Track rod end ball joint dust cover missing (2.1.3 (g) (ii)) | 1 |
| Offside Track rod end modification unsafe split pin missing (2.1.3 (f) (i)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced +outer sills (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Hole near rear beam mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch near strut top (hole) (5.3.6 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting marked in yellow (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting marked in yellow (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Nearside Rear Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting marked in yellow (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill,(Holed) (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sills (7.1.1 (a) (i)) | 1 |
| Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting n/s/r by crossmemeber behind bumper (6.2.2 (d) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s/r inner wheel arch to sills (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sills (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sills (5.3.6 (a) (i)) | 1 |
| Offside Front Brake pipe leaking on a hydraulic braking system to rear (1.1.11 (b) (ii)) | 1 |
| Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Vehicle structure is so weakened by damage within 30cm of a towbar mounting, the towbar is likely to become detached (6.1.6 (i) (ii)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure inadequately repaired such that structural rigidity is significantly reduced inner sill repair plate not welded fully (6.1.1 (d) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Front Steering linkage ball joint ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Nearside Rear Suspension rod pin or bush excessively worn axle panhard rod (5.3.4 (a) (i)) | 1 |
| Nearside Front Headlamp light source and lamp not compatible led bulb fitted (4.1.4 (c)) | 1 |
| Offside Front Headlamp light source and lamp not compatible led bulb fitted (4.1.4 (c)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Vehicle structure excessively corroded within 30cm of towbar mounting corner (6.1.6 (i) (i)) | 1 |
| Offside Rear Inner Vehicle structure fractured seriously affecting its strength within 30cm of towbar mounting corner (6.1.6 (i) (i)) | 1 |
| Nearside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Rear Exhaust fumes entering cabin tailpipe missing (6.1.2 (b) (i)) | 1 |
| Power steering component leaking at rack pinion (2.1.5 (a)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength and centre area of sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength on floor marked yellow (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component pin or bush excessively worn tie bar, bush worn away
marked yellow (5.3.4 (a) (i)) | 1 |
| Nearside Front Vehicle structure inadequately repaired such that it is likely to adversely affect braking or steering (6.1.1 (d) (ii)) | 1 |
| Offside Front Vehicle structure inadequately repaired such that it is likely to adversely affect braking or steering (6.1.1 (d) (ii)) | 1 |
| Nearside Front Vehicle structure modified such that structural rigidity is significantly reduced (6.1.1 (d) (i)) | 1 |
| Offside Front Vehicle structure modified such that structural rigidity is significantly reduced (6.1.1 (d) (i)) | 1 |
| Front Vehicle structure modified such that structural rigidity is significantly reduced x member (6.1.1 (d) (i)) | 1 |
| Nearside Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Offside Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Parking brake inoperative on one side no reserve travel (1.4.1 (a)) | 1 |
| Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Nearside Inner Vehicle structure inadequately repaired such that structural rigidity is significantly reduced sill (6.1.1 (d) (i)) | 1 |
| Offside Inner Vehicle structure inadequately repaired such that structural rigidity is significantly reduced sill (6.1.1 (d) (i)) | 1 |
| Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Suspension arm pin or bush excessively worn rear axle stabilizer arm bush excessivly worn (5.3.4 (a) (i)) | 1 |
| Nearside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting hole in inner seal 30cm from rear suspension (6.2.2 (d) (i)) | 1 |
| Nearside Rear Outer Road wheel fixing missing (5.2.1 (a) (i)) | 1 |
| Offside Rear Outer Road wheel fixing missing (5.2.1 (a) (i)) | 1 |
| Offside Front Outer Road wheel fixing missing (5.2.1 (a) (i)) | 1 |
| Nearside Rear Upper Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Nearside Rear Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Nearside Front Coil spring fractured or broken (5.3.1 (b) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Integral body structure is fractured and structural rigidity is significantly reduced Inner sill corroded (6.1.1 (a) (i)) | 1 |
| Offside Rear Integral body structure inadequately repaired such that structural rigidity is significantly reduced Offside inner sill corroded. (6.1.1 (d) (i)) | 1 |
| Battery insecure and likely to fall from carrier Battery not secure. (4.13 (a) (ii)) | 1 |
| Nearside Front Side repeater missing (4.4.1 (a) (ii)) | 1 |
| Offside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Central Rear Seat belt buckle damaged (7.1.2 (d)) | 1 |
| Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Steering rack likely to become detached Steering Rack has Excessive Movement (2.1.3 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases At Rear Silencer (6.1.2 (a)) | 1 |
| Oil leaking excessively from engine Engine Has Oil Leak (8.4.1 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i)) | 1 |
| Brake hydraulic reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner (5.3.6 (a) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner panel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner panel (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill and front outrigger (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 1 |
| Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i)) | 1 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor to sill section (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced below bumper corner section (6.1.1 (c) (i)) | 1 |
| Central Front Lower Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Nearside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced ALL ROUND THE SILLS (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Front Lower Fuel hose leaking FUEL FILTER CORRODED AND LEAKING DIESEL (6.1.3 (b) (i)) | 1 |
| Nearside Front Inner Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Offside Front Inner Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Nearside Rear Towbar attachment insecure (6.1.6 (c) (i)) | 1 |
| Nearside Rear Outer Suspension arm insecurely attached securing nut missing (5.3.3 (a) (i)) | 1 |
| Nearside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Service brake lagging in operation (1.2.1 (d)) | 1 |
| Nearside Front Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Fuel cap/sealing device ineffective temporary cap (6.1.3 (b) (i)) | 1 |
| Fuel system component leaking fuel pump (6.1.3 (b) (i)) | 1 |
| Nearside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill Corroded (6.2.2 (d) (i)) | 1 |