Most common failures | No# failures |
---|
Parking brake: efficiency below requirements |3.7.B.7| | 3 |
Brake pipe excessively corroded | 2 |
Registration plate lamp issues | 2 |
Headlamp aim out of alignment | 2 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Windscreen wiper does not clear the windscreen effectively | 1 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Position lamp not working |4.2.1 |a|| | 1 |
Offside Rear front brake binding |3.7.B.1| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |
Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Rear Mechanical brake component has restricted free movement | 1 |
Offside Rear Shock absorber casing damaged externally so the unit does not function |2.7.2a| | 1 |
Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
Offside Rear Coil spring mounting damaged and seriously weakened |2.4.C.3c| | 1 |
Front brake application uneven | 1 |
Nearside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Offside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Exhaust engine idle speed too high |7.3.A.2a| | 1 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |
Offside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Headlamp switch faulty |1.7.1| | 1 |
Horn control missing |1.6.1| | 1 |
Horn not working |1.6.2a| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Rear fog lamp not working |1.3.2b| | 1 |
Fuel cap/sealing device sealing washer deteriorated |7.2.4c| | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Nearside Front Brake hose twisted |found during steering lock to lock check| |2.2.D.2b| | 1 |
Exhaust system not adequately supported |7.1.1| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 1 |
Windscreen washer control missing |8.2.1a| | 1 |
Nearside Outer Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Outer Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Offside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Service brake excessively binding |1.2.1 |f|| | 1 |
Offside Front Service brake excessively binding |1.2.1 |f|| | 1 |
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i|| | 1 |