Most common failures | No# failures |
---|
Headlamp aim out of alignment | 8 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Horn not working |1.7.3a| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear suspension has a fracture of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Brake component leaking fluid |3.2.B4| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Gradient brake test indicates a sticking brake |3.3.D1c| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Nearside Front Handlebar deformed out of alinement |2.1.1b| | 1 |
Offside Front Position lamp switch insecure |1.1.4b| | 1 |
Front Front position lamp adversely affected by the operation of another lamp very dim |1.1.3b| | 1 |
Nearside Front Indicator switch insecure |1.5.4| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Brake hose excessively deteriorated | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Brake hose leaking fluid |3.2.B4| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Horn missing |1.7.1| | 1 |
Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Offside Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Offside Rear Lower Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Upper Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Lower Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |