>

MOT History from tests of petrol MZ MZs year 1995

Review the list of common MZ MZ failures below or to perform a specific mot history check on your MZ then use our popular KnowYourCar service

mot history
Pass percent:84.51%
(The average a petrol MZ MZ year 1995 passes without issue)
Based on:381 MOT Tests
Most common failuresNo# failures
Stop lamp does not illuminate immediately a brake applies |1.3.1a|8
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|6
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|6
Headlamp aim out of alignment4
Front shock absorber seal failed and leaking oil |2.3.3|3
Front wheel bearings have excessive free play |2.3.5b|3
Rear reflector on motorcycle missing |1.4.1|3
Offside Front shock absorber seal failed and leaking oil |2.3.3|2
Rear Brake pedal has inadequate reserve travel |3.1.3b|2
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|2
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Horn not working |1.7.3a|2
Rear Brake reaction bracket insecure |3.2.A1j|2
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Horn not loud enough to be heard by another road user |1.7.3a|2
Offside Front Footrest insecure |6.2.1a|2
Riders seat insecure |6.2.1a|2
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|2
Lower Rear suspension bush has excessive free play |2.4.A2a|i||1
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i||1
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Rear wheel bearings are excessively rough |2.4.A.2c|1
Front Brake lever insecure |3.1.2a|1
Handlebar deformed |2.1.1b|1
Nearside Rear Shock absorber has an excessively worn bush (5.3.2 (c))1
Offside Rear Shock absorber has an excessively worn bush (5.3.2 (c))1
Rear Brake pedal has insufficient reserve travel (1.1.2 (a))1
Rear wheel spindle securing nut locking device missing |2.4.A.2b|1
Front Floor brake test indicates a binding brake |3.3.C2c|1
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Front Stop lamp affected by the operation of another lamp |1.3.2|1
Rear Stop lamp affected by the operation of another lamp |1.3.2|1
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b|1
Nearside Rear Direction indicators not working |1.5.1c|1
Front Drive chain sprocket worn to excess |6.2.1e|1
Fuel system component leaking |7.2.1a|1
Front Plate brake test indicates a binding brake |3.3.B1a|1
Front Brake hose leaking fluid |3.2.B4|1
Headlamp switch insecure |1.2.4|1
Nearside Rear Direction indicator deteriorated and function impaired |1.5.3a|1
Nearside Rear Direction indicator insecure |1.5.3b|1
Nearside Rear Footrest missing |6.2.1a|1
Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i|1
Front Brake master cylinder fluid level dangerously low |3.2.B1d|1
Footrest missing |6.2.1a|1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|1
Rear Brake pipe excessively damaged |3.2.B2a|1
Indicator switch insecure |1.5.4|1
Front Headlamp aim beam image kick up to the offside |1.6|1
Rear suspension bearing has excessive free play |2.4.A2a|i||1
Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Rear wheel bearings have excessive free play |2.4.A.2c|1
Headlamp aim beam image kick up to the offside |1.6|1
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Front Brake lever cannot be applied smoothly |3.1.3d|1
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Fuel system component insecure |7.2.1b|1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|1
Direction indicators flashing more than 120 times per minute |1.5.1c|1
Drive chain excessively loose |6.2.1d|1
Nearside Front shock absorber seal failed and leaking oil |2.3.3|1
Front wheel bearings are excessively rough |2.3.5b|1
Stop lamp not working (4.3.1 (a) (ii))1
Fuel hose leaking |7.2.1a|1
Rear reflector likely to become detached |4.8.1 |b| |ii||1
Nearside Front Handlebar grip insecure to handlebar |2.2.1 |d| |ii||1
Front Horn not loud enough to be heard by another road user |1.7.3a|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy