Most common failures | No# failures |
---|
Headlamp aim out of alignment | 16 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Registration plate issues | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Horn not working |1.7.3a| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Fuel cap missing |7.2.2a| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Brake component insecure (1.1.21 (c)) | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Drive chain excessively loose (6.2.1d) | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Pillion seat insecure (6.2.6 (a) (ii)) | 1 |
Headlamp lens seriously defective (4.1.1 (b) (ii)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Wheel spoke excessively loose (5.2.2 (d)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear reflector defective or damaged by more than 50% of the reflecting surface (4.8.1 (a) (ii)) | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Horn control defective |1.7.2a| | 1 |
Stop lamp does not illuminate immediately a brake applies foot lever |1.3.1a| | 1 |
Front Brake lever is so short that the brake cannot be readily applied |1.1.2 |d|| | 1 |
Central Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
Rear Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake component is excessively corroded |3.1.5| | 1 |
Rear Brake component is excessively corroded |3.1.5| | 1 |
Rear Roller brake test indicates a binding brake stripped and cleaned caliper assy. |3.3.A1a| | 1 |
Rear Wheel spoke cracked |5.2.2 |d|| | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Front Stop lamp damaged and function impaired |1.3.3a| | 1 |