MOT History from tests of petrol MZ 125SXs year 2004

Review the list of common MZ 125SX failures below or to perform a specific mot history check on your MZ then use our popular KnowYourCar service

mot history

Pass percent:73.56%

(The average a petrol MZ 125SX year 2004 passes without issue)

Based on:87 MOT Tests

Most common failures	No# failures
Rear reflector on motorcycle missing \|1.4.1\|	4
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	3
Horn not working \|1.7.3a\|	3
Nearside Front Direction indicator not working \|1.5.1c\|	2
Drive chain excessively loose \|6.2.1d\|	2
Rear Wheel spoke missing \|4.2.1b\|	2
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Headlamp aim out of alignment	2
Front Wheel spoke excessively loose \|4.2.1b\|	1
Stop lamp not working (4.3.1 (a) (ii))	1
Offside Front Wheel spoke excessively loose (5.2.2 (d))	1
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	1
Drive chain worn to excess \|6.2.1e\|	1
Front Drive chain sprocket worn to excess \|6.2.1e\|	1
Rear Drive chain sprocket worn to excess \|6.2.1e\|	1
Rear Wheel spoke excessively loose (5.2.2 (d))	1
Front Stop lamp not working (4.3.1 (a) (ii))	1
Front Wheel spoke missing \|4.2.1b\|	1
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	1
Offside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Rear Drive chain excessively loose \|6.2.1d\|	1
Rear Rear reflector on motorcycle obscured \|1.4.1\|	1
Headlamp aim beam image kick up to the offside \|1.6\|	1
Rear Rear reflector on motorcycle missing \|1.4.1\|	1
Rear wheel bearings have excessive free play \|2.4.A.2c\|	1
Handlebar deformed \|2.1.1b\|	1
Nearside Rear Direction indicator missing \|1.5.1a\|	1
Offside Rear Direction indicator missing \|1.5.1a\|	1
Offside Front Direction indicator missing \|1.5.1a\|	1
Nearside Front Direction indicator missing \|1.5.1a\|	1
Rear Brake fluid reservoir fluid level dangerously low \|3.2.B1d\|	1
Front Roller brake test indicates a binding brake unable to test front wheel bearings \|3.3.A1a\|	1
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Rear reflector on motorcycle missing \|1.4.1\|	4
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	3
Horn not working \|1.7.3a\|	3
Nearside Front Direction indicator not working \|1.5.1c\|	2
Drive chain excessively loose \|6.2.1d\|	2
Rear Wheel spoke missing \|4.2.1b\|	2
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Headlamp aim out of alignment	2
Front Wheel spoke excessively loose \|4.2.1b\|	1
Stop lamp not working (4.3.1 (a) (ii))	1
Offside Front Wheel spoke excessively loose (5.2.2 (d))	1
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	1
Drive chain worn to excess \|6.2.1e\|	1
Front Drive chain sprocket worn to excess \|6.2.1e\|	1
Rear Drive chain sprocket worn to excess \|6.2.1e\|	1
Rear Wheel spoke excessively loose (5.2.2 (d))	1
Front Stop lamp not working (4.3.1 (a) (ii))	1
Front Wheel spoke missing \|4.2.1b\|	1
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	1
Offside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Rear Drive chain excessively loose \|6.2.1d\|	1
Rear Rear reflector on motorcycle obscured \|1.4.1\|	1
Headlamp aim beam image kick up to the offside \|1.6\|	1
Rear Rear reflector on motorcycle missing \|1.4.1\|	1
Rear wheel bearings have excessive free play \|2.4.A.2c\|	1
Handlebar deformed \|2.1.1b\|	1
Nearside Rear Direction indicator missing \|1.5.1a\|	1
Offside Rear Direction indicator missing \|1.5.1a\|	1
Offside Front Direction indicator missing \|1.5.1a\|	1
Nearside Front Direction indicator missing \|1.5.1a\|	1
Rear Brake fluid reservoir fluid level dangerously low \|3.2.B1d\|	1
Front Roller brake test indicates a binding brake unable to test front wheel bearings \|3.3.A1a\|	1
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1

MOT History from tests of petrol MZ 125SXs year 2004

Find us on Facebook