Most common failures | No# failures |
---|
Headlamp aim out of alignment | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Rear Drive chain sprocket worn to excess (6.2.1e) | 3 |
Drive chain excessively loose (6.2.1d) | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Brake fluid reservoir fluid level dangerously low (3.2.B1d) | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Rear reflector on motorcycle obscured |1.4.1| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Brake fluid reservoir fluid level dangerously low (3.2.B1d) | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d) | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts (3.2.B2c) | 1 |
Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Nearside Front Direction indicator insecure (1.5.3b) | 1 |
Headlamp aim headlamp damaged and function impaired (1.2.3a) | 1 |
Front Wheel spoke missing (4.2.1b) | 1 |
Front wheel bearings are excessively rough (2.3.5b) | 1 |
Brake performance not tested (3.3) | 1 |
Rear Brake master cylinder fluid level dangerously low (3.2.B1d) | 1 |
Fuel system component leaking (6.1.3 (b) (i)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp dipped beam affected by the operation of another lamp (1.2.2c) | 1 |
Headlamp aim not tested (1.6) | 1 |
Front Wheel has an excessively distorted bead rim. (4.2.2) | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front Steering lock stop ineffective |2.1.3| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Horn not working |1.7.3a| | 1 |
Front Wheel spoke missing |4.2.1b| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Stop lamp does not illuminate immediately a brake applies not working from both switches. |1.3.1a| | 1 |
Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Position lamp switch insecure main control switch left side insecure |1.1.4b| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Front Indicator switch insecure |1.5.4| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Brake pedal is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |