| Most common failures | No# failures |
|---|
| Rear reflector on motorcycle missing |1.4.1| | 16 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 15 |
| Headlamp aim out of alignment | 11 |
| Registration plate issues | 7 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 6 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Registration plate lamp issues | 5 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Steering headbearing has excessive free play |2.2.2| | 3 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
| Horn not working |1.7.3a| | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Rear Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Fuel tank leaking |7.2.1a| | 1 |
| Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Offside Front Steering lock stop ineffective |2.1.3| | 1 |
| Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Offside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Stop lamp not working from both brakes (4.3.1 (a) (ii)) | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Nearside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Rear Brake pedal is inoperative |3.1.3c| | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Stop lamp does not illuminate by the operation of both brake controls repaired sticky front switch (4.3.2 (a) (iii)) | 1 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |