| Most common failures | No# failures |
|---|
| Registration plate issues | 10 |
| Headlamp aim out of alignment | 10 |
| Riders seat insecure |6.2.1a| | 8 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Drive chain excessively loose |6.2.1d| | 6 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
| Rear reflector on motorcycle missing |1.4.1| | 5 |
| Steering headbearing has excessive free play |2.2.2| | 5 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
| Drive chain worn to excess |6.2.1e| | 3 |
| Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 3 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| An item not tested |Manual| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Nearside Front Direction indicator missing |1.5.1a| | 2 |
| Offside Front Direction indicator missing |1.5.1a| | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Horn not working |1.7.3a| | 2 |
| Horn sounds harsh or grating |1.7.3c| | 2 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
| Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
| Headlamp insecure |1.2.3b| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Footrest missing |6.2.1a| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Brake pedal insecure |3.1.2a| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Upper Riders seat insecure |6.2.1a| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Nearside Rear Exhaust mounting missing |7.1.1c| | 1 |
| Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Fork yoke deformed |2.1.1b| | 1 |
| Rear position lamp incorrect colour |1.1.2b| | 1 |
| Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Front suspension assembly component loose top yoke central nut |2.3.1| | 1 |
| Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Front Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Rear Brake pedal mounting insecure |3.1.2a| | 1 |
| Footrest insecure |6.2.1a| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Front Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
| Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Brake pedal insecure (1.1.2 (e) (i)) | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Brake lever is inoperative |3.1.3c| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Rear Brake lever excessively damaged |3.2.A1c| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Offside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Centre Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Front Headlamp switch faulty |1.2.4| | 1 |
| Rear Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Drive chain worn to excess |6.2.1e| | 1 |
| Centre Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Nearside Front Upper Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Centre Front Upper Fuel system component insecure |7.2.1b| | 1 |
| Front suspension assembly component excessively bent |2.3.1| | 1 |
| Front suspension has severe distortion of a load bearing member or its supporting structure. |2.3.8| | 1 |
| Front suspension assembly component excessively misaligned |2.3.1| | 1 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Centre Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Offside Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Outer Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Handlebar deformed |2.1.1b| | 1 |
| Rear wheel insecure |4.2.3b| | 1 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Fuel tank leaking |7.2.1a| | 1 |
| Front Wheel spoke excessively loose |4.2.1b| | 1 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Nearside Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |