MOT History from tests of petrol MOTOR HISPANIA RYZs year 2003

Review the list of common MOTOR HISPANIA RYZ failures below or to perform a specific mot history check on your MOTOR HISPANIA then use our popular KnowYourCar service

mot history

Pass percent:53.85%

(The average a petrol MOTOR HISPANIA RYZ year 2003 passes without issue)

Based on:13 MOT Tests

Most common failures	No# failures
Drive chain worn to excess \|6.2.1e\|	3
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	2
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	2
Drive chain excessively loose \|6.2.1d\|	2
Headlamp aim out of alignment	2
Rear wheel bearings have excessive free play \|2.4.A.2c\|	1
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking \|6.1.1c\|	1
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	1
Headlamp aim beam image kick up to the offside \|1.6\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Brake lever is damaged and the brake cannot be readily applied \|3.1.3c\|	1
Brake lever has inadequate reserve travel \|3.1.3b\|	1
Brake pedal cannot be applied smoothly \|3.1.3d\|	1
Clutch lever positioned so it cannot be readily operated. \|6.2.1g\|	1
Rear mono-shock pivot excessively worn \|2.4.B.4\|	1
Front Hydraulic brake control feels spongy \|3.1.4a\|	1
Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	1
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	1
Horn sounds harsh or grating \|1.7.3c\|	1
Direction indicators affected by the operation of another lamp \|1.5.1c\|	1
Rear Drive chain sprocket worn to excess \|6.2.1e\|	1
Front Drive chain sprocket worn to excess \|6.2.1e\|	1
Brake pedal has inadequate reserve travel \|3.1.3b\|	1
Rear Brake fluid reservoir fluid level dangerously low \|3.2.B1d\|	1
Rear Brake hose leaking fluid \|3.2.B4\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Riders seat insecure \|6.2.1a\|	1
All position lamps do not illuminate immediately when switched on \|1.1.3a\|	1
Direction indicators not working \|1.5.1c\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Drive chain worn to excess \|6.2.1e\|	3
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	2
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	2
Drive chain excessively loose \|6.2.1d\|	2
Headlamp aim out of alignment	2
Rear wheel bearings have excessive free play \|2.4.A.2c\|	1
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking \|6.1.1c\|	1
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	1
Headlamp aim beam image kick up to the offside \|1.6\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Brake lever is damaged and the brake cannot be readily applied \|3.1.3c\|	1
Brake lever has inadequate reserve travel \|3.1.3b\|	1
Brake pedal cannot be applied smoothly \|3.1.3d\|	1
Clutch lever positioned so it cannot be readily operated. \|6.2.1g\|	1
Rear mono-shock pivot excessively worn \|2.4.B.4\|	1
Front Hydraulic brake control feels spongy \|3.1.4a\|	1
Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	1
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	1
Horn sounds harsh or grating \|1.7.3c\|	1
Direction indicators affected by the operation of another lamp \|1.5.1c\|	1
Rear Drive chain sprocket worn to excess \|6.2.1e\|	1
Front Drive chain sprocket worn to excess \|6.2.1e\|	1
Brake pedal has inadequate reserve travel \|3.1.3b\|	1
Rear Brake fluid reservoir fluid level dangerously low \|3.2.B1d\|	1
Rear Brake hose leaking fluid \|3.2.B4\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Riders seat insecure \|6.2.1a\|	1
All position lamps do not illuminate immediately when switched on \|1.1.3a\|	1
Direction indicators not working \|1.5.1c\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1

MOT History from tests of petrol MOTOR HISPANIA RYZs year 2003

Find us on Facebook