Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 13 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Drive chain excessively loose |6.2.1d| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Registration plate issues | 5 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Headlamp aim out of alignment | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Horn not working |1.7.3a| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Nearside Steering lock stop ineffective |2.1.3| | 2 |
Offside Steering lock stop ineffective |2.1.3| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Front Steering lock stop missing |2.1.3| | 2 |
Front position lamp insecure |1.1.1c| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Front Brake master cylinder severely damaged |3.2.B1b| | 2 |
Indicator tell tale not operating correctly |1.5.2| | 2 |
Nearside Front Footrest insecure |6.2.1a| | 2 |
Offside Front Footrest insecure |6.2.1a| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Drive chain fouling another component |6.2.1d| | 1 |
Front Brake lever pivots excessively worn |3.1.3a| | 1 |
Front Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Rear Seat insecure |6.2.1a| | 1 |
Front Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Footrest missing |6.2.1a| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Headlamp aim not tested |1.6| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Fuel cap sealing washer missing |7.2.2c| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Front Steering lock stop maladjusted |2.1.3| | 1 |
Front Exhaust mounting missing |7.1.1c| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Brake hose excessively deteriorated | 1 |
Rear Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Front Horn control defective |1.7.2a| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Front Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Vehicle identification number not legible |6.3.5a| | 1 |
Position lamp switch faulty |1.1.4a| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Rear Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear Lower Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Lower Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Position lamp switch does not operate the front and rear position lamps |1.1.4c| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Lower Shock absorber has an excessively worn bush |5.3.2 |c|| | 1 |
Brake fluid reservoir fluid level significantly below minimum level Rear fluid reservoir broken and empty |1.1.10 |d| |ii|| | 1 |
Rear Position lamp showing white light to the rear |4.2.3 |a| |ii|| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Nearside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Brake pedal mounting insecure |3.1.2a| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Drive chain worn to excess |6.2.1e| | 1 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Rear Brake pipe excessively chafed |3.2.B2a| | 1 |
Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |