Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 24 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
Headlamp aim out of alignment | 13 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Steering headbearing has excessive free play |2.2.2| | 12 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 12 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Registration plate issues | 10 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 10 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 8 |
Drive chain excessively loose |6.2.1d| | 8 |
Nearside Rear Direction indicator not working |1.5.1c| | 8 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 8 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 8 |
Horn not working |1.7.3a| | 6 |
Offside Rear Direction indicator not working |1.5.1c| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
Drive chain worn to excess |6.2.1e| | 5 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Headlamp switch faulty |1.2.4| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Direction indicators not working |1.5.1c| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Brake lever insecure |3.1.2a| | 3 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 3 |
Drive chain excessively tight |6.2.1d| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 2 |
Front Brake disc|s| cracked |3.2.A1g| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Brake pedal is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
Horn missing |1.7.1| | 2 |
Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
Drive chain fouling another component |6.2.1d| | 2 |
Rear Brake disc|s| cracked |3.2.A1g| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Nearside Steering lock stop missing |2.1.3| | 2 |
Offside Steering lock stop missing |2.1.3| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Brake disc|s| insecure |3.2.A1g| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Brake lever mounting insecure |3.1.2a| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Seat insecure |6.2.1a| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
Front wheel insecure |4.2.3b| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Chain guard insecure |6.2.1c| | 1 |
Direction indicator incorrect colour |1.5.1b| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Rear suspension has severe distortion of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Rear Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Steering linkage locking device missing |2.1.3 |d|| | 1 |
Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Nearside Horn control defective |1.7.2a| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
Front Handlebar fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Nearside Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Rear Footrest missing (6.2.12 (a)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Steering operation linkage fouling when handlebars turned from lock to lock (2.1.4 (a)) | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
An item not tested |Manual| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Headlamp damaged and function impaired |1.2.3a| | 1 |
Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
Rear Motorcycle structure excessively damaged |6.1.1a| | 1 |
Offside Front Throttle operating incorrectly |6.2.1f| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Offside Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Footrest insecure |6.2.1a| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Horn control defective |1.7.2a| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Brake lever pivots excessively worn |3.1.3a| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Centre Front Upper Handlebar deformed |2.1.1b| | 1 |
Inner Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Rear Brake pedal is inoperative |3.1.3c| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Rear Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Nearside Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Offside Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Inner Front Upper Steering lock stop missing |2.1.3| | 1 |
Nearside Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Inner Front Upper Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Nearside Position lamp switch faulty |1.1.4a| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Handlebar fractured |2.1.1b| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Rear suspension component seized |2.4A2a|ii|| | 1 |
Brake lever attachment screws loose |3.1.2b| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Offside Steering lock stop maladjusted |2.1.3| | 1 |
Rear mono-shock insecure |2.4.B.4| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Centre Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
Nearside Brake master cylinder severely damaged |3.2.B1b| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Position lamp switch faulty |1.1.4a| | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Upper Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear suspension bush has excessive free play Bottom shock mount |2.4.A2a|i|| | 1 |
Offside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride Fork leg pinch bolt loose. |6.2.1h| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Rear Brake component leaking fluid |3.2.B4| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Steering lock stop ineffective |2.1.3| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Brake pipe inadequately supported |3.2.B2b| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |