MOT History from tests of petrol MOTO ROMA GOs year 2004

Review the list of common MOTO ROMA GO failures below or to perform a specific mot history check on your MOTO ROMA then use our popular KnowYourCar service

mot history

Pass percent:71.76%

(The average a petrol MOTO ROMA GO year 2004 passes without issue)

Based on:131 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	7
Steering headbearing has excessive free play \|2.2.2\|	4
Registration plate issues	3
Exhaust is leaking and excessively noisey \|7.1.1b\|	3
Horn not working \|1.7.3a\|	2
Offside Rear Direction indicators not working \|1.5.1c\|	2
Brake hose excessively deteriorated	2
Front Steering headbearing has excessive free play \|2.2.2\|	2
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Front Brake indicates excessive fluctuation of brake effort \|1.2.1 \|e\|\|	1
Nearside Motorcycle structure joining/attachment plate or fastening insecure \|6.1.1 \|b\| \|i\|\|	1
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Rear Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Rear reflector on motorcycle obscured \|1.4.1\|	1
Exhaust excessively deteriorated \|7.1.1a\|	1
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	1
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Rear Brake reaction bracket insecure \|3.2.A1j\|	1
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	1
Nearside Rear Direction indicators not working \|1.5.1c\|	1
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	1
Front Floor brake test indicates a binding brake \|3.3.C2c\|	1
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	1
Rear Floor brake test indicates a sticking brake \|3.3.C2c\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Direction indicators not working \|1.5.1c\|	1
Front Roller brake test indicates a binding brake \|3.3.A1a\|	1
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	1
Nearside Rear Brake lever has inadequate reserve travel \|3.1.3b\|	1
Rear Rear reflector on motorcycle missing \|1.4.1\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	7
Steering headbearing has excessive free play \|2.2.2\|	4
Registration plate issues	3
Exhaust is leaking and excessively noisey \|7.1.1b\|	3
Horn not working \|1.7.3a\|	2
Offside Rear Direction indicators not working \|1.5.1c\|	2
Brake hose excessively deteriorated	2
Front Steering headbearing has excessive free play \|2.2.2\|	2
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Front Brake indicates excessive fluctuation of brake effort \|1.2.1 \|e\|\|	1
Nearside Motorcycle structure joining/attachment plate or fastening insecure \|6.1.1 \|b\| \|i\|\|	1
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Rear Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Rear reflector on motorcycle obscured \|1.4.1\|	1
Exhaust excessively deteriorated \|7.1.1a\|	1
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	1
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Rear Brake reaction bracket insecure \|3.2.A1j\|	1
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	1
Nearside Rear Direction indicators not working \|1.5.1c\|	1
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	1
Front Floor brake test indicates a binding brake \|3.3.C2c\|	1
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	1
Rear Floor brake test indicates a sticking brake \|3.3.C2c\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Direction indicators not working \|1.5.1c\|	1
Front Roller brake test indicates a binding brake \|3.3.A1a\|	1
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	1
Nearside Rear Brake lever has inadequate reserve travel \|3.1.3b\|	1
Rear Rear reflector on motorcycle missing \|1.4.1\|	1

MOT History from tests of petrol MOTO ROMA GOs year 2004

Find us on Facebook