MOT History from tests of petrol MOTO GUZZI V65s year 1985

Review the list of common MOTO GUZZI V65 failures below or to perform a specific mot history check on your MOTO GUZZI then use our popular KnowYourCar service

mot history

Pass percent:84.71%

(The average a petrol MOTO GUZZI V65 year 1985 passes without issue)

Based on:85 MOT Tests

Most common failures	No# failures
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Headlamp aim out of alignment	2
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Direction indicators not working \|1.5.1c\|	1
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Rear Position lamp not working (4.2.1 (a))	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Rear wheel bearings have excessive free play (2.4.A.2c)	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Offside Engine mounting/bracket excessively loose rear engine mounting boult loose (6.1.8 (a) (ii))	1
Offside Engine mounting/bracket missing front engine/frame boult 1 missing one loose (6.1.8 (a) (ii))	1
Nearside Engine mounting/bracket missing rear engine mounting boult missing (6.1.8 (a) (ii))	1
Offside Rear Position lamp not working (4.2.1 (a))	1
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))	1
Front Front wheel spindle securing nut\|s\| loose \|2.3.3a\|	1
Front Hydraulic brake control feels spongy \|3.1.4a\|	1
Front Brake lever has insufficient reserve travel \|1.1.2 \|a\|\|	1
Front Brake master cylinder leaking \|1.1.10 \|b\| \|ii\|\|	1
Offside Handlebar fouling on the fuel tank or bodywork on full lock \|2.1.4 \|b\|\|	1
Nearside Rear Footrest missing \|6.2.12 \|a\|\|	1
Offside Rear Footrest missing \|6.2.12 \|a\|\|	1
Front Direction indicator not working \|1.5.1c\|	1
Rear Direction indicator not working \|1.5.1c\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Headlamp aim out of alignment	2
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Direction indicators not working \|1.5.1c\|	1
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Rear Position lamp not working (4.2.1 (a))	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Rear wheel bearings have excessive free play (2.4.A.2c)	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Offside Engine mounting/bracket excessively loose rear engine mounting boult loose (6.1.8 (a) (ii))	1
Offside Engine mounting/bracket missing front engine/frame boult 1 missing one loose (6.1.8 (a) (ii))	1
Nearside Engine mounting/bracket missing rear engine mounting boult missing (6.1.8 (a) (ii))	1
Offside Rear Position lamp not working (4.2.1 (a))	1
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))	1
Front Front wheel spindle securing nut\|s\| loose \|2.3.3a\|	1
Front Hydraulic brake control feels spongy \|3.1.4a\|	1
Front Brake lever has insufficient reserve travel \|1.1.2 \|a\|\|	1
Front Brake master cylinder leaking \|1.1.10 \|b\| \|ii\|\|	1
Offside Handlebar fouling on the fuel tank or bodywork on full lock \|2.1.4 \|b\|\|	1
Nearside Rear Footrest missing \|6.2.12 \|a\|\|	1
Offside Rear Footrest missing \|6.2.12 \|a\|\|	1
Front Direction indicator not working \|1.5.1c\|	1
Rear Direction indicator not working \|1.5.1c\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1

MOT History from tests of petrol MOTO GUZZI V65s year 1985

Find us on Facebook