MOT History from tests of petrol MOTO GUZZI SPADAs year 1980

Review the list of common MOTO GUZZI SPADA failures below or to perform a specific mot history check on your MOTO GUZZI then use our popular KnowYourCar service

mot history

Pass percent:83.91%

(The average a petrol MOTO GUZZI SPADA year 1980 passes without issue)

Based on:230 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	8
Registration plate issues	6
Horn not working \|1.7.3a\|	4
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	3
Rear reflector on motorcycle missing \|1.4.1\|	2
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Front Front suspension assembly component loose \|2.3.1\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Offside Position lamp switch insecure \|1.1.4b\|	1
Rear Brake pedal so insecure that the brake cannot be readily applied \|1.1.2 \|e\| \|ii\|\|	1
Rear Brake performance not tested \|1.2.1 \|g\|\|	1
Nearside Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	1
Rear Brake indicates excessive fluctuation of brake effort \|1.2.1 \|e\|\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Brake lever has inadequate reserve travel \|3.1.3b\|	1
Brake pedal has inadequate reserve travel \|3.1.3b\|	1
Rear Direction indicators not working \|1.5.1c\|	1
Offside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	1
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	1
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Brake disc contaminated front and rear (1.1.14 (b))	1
Front Brake hose leaking fluid \|3.2.B4\|	1
Offside Handlebar mounting clamp loose \|2.1.1a\|	1
Rear Hydraulic brake control creeps under load. \|3.1.4a\|	1
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Front position lamp missing \|1.1.1a\|	1
Stop lamp affected by the operation of another lamp \|1.3.2\|	1
Stop lamp remains on when the brake is released \|1.3.1e\|	1
Horn control defective \|1.7.2a\|	1
Headlamp aim headlamp damaged and function impaired \|1.2.3a\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	8
Registration plate issues	6
Horn not working \|1.7.3a\|	4
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	3
Rear reflector on motorcycle missing \|1.4.1\|	2
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Front Front suspension assembly component loose \|2.3.1\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Offside Position lamp switch insecure \|1.1.4b\|	1
Rear Brake pedal so insecure that the brake cannot be readily applied \|1.1.2 \|e\| \|ii\|\|	1
Rear Brake performance not tested \|1.2.1 \|g\|\|	1
Nearside Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	1
Rear Brake indicates excessive fluctuation of brake effort \|1.2.1 \|e\|\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Brake lever has inadequate reserve travel \|3.1.3b\|	1
Brake pedal has inadequate reserve travel \|3.1.3b\|	1
Rear Direction indicators not working \|1.5.1c\|	1
Offside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	1
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	1
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Brake disc contaminated front and rear (1.1.14 (b))	1
Front Brake hose leaking fluid \|3.2.B4\|	1
Offside Handlebar mounting clamp loose \|2.1.1a\|	1
Rear Hydraulic brake control creeps under load. \|3.1.4a\|	1
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Front position lamp missing \|1.1.1a\|	1
Stop lamp affected by the operation of another lamp \|1.3.2\|	1
Stop lamp remains on when the brake is released \|1.3.1e\|	1
Horn control defective \|1.7.2a\|	1
Headlamp aim headlamp damaged and function impaired \|1.2.3a\|	1

MOT History from tests of petrol MOTO GUZZI SPADAs year 1980

Find us on Facebook