>

MOT History from tests of petrol MOTO GUZZI CALIFORNIAs year 2004

Review the list of common MOTO GUZZI CALIFORNIA failures below or to perform a specific mot history check on your MOTO GUZZI then use our popular KnowYourCar service

mot history
Pass percent:85.23%
(The average a petrol MOTO GUZZI CALIFORNIA year 2004 passes without issue)
Based on:596 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment12
Rear reflector on motorcycle missing |1.4.1|11
Front position lamp does not illuminate immediately when switched on |1.1.3a|6
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Registration plate issues4
Rear reflector missing (4.8.2 (a) (ii))4
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|3
Front wheel bearings have excessive free play |2.3.5b|3
Offside Front Direction indicator not working |1.5.1c|3
Rear wheel bearings have excessive free play |2.4.A.2c|3
Steering headbearing has excessive free play |2.2.2|2
Nearside Front Direction indicator not working |1.5.1c|2
Rear Wheel bearing has excessive play |5.1.3 |a| |i||2
Front wheel bearings are excessively rough |2.3.5b|2
Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|2
Direction indicators flashing more than 120 times per minute |1.5.1c|2
Offside Front Direction indicator not working (4.4.1 (a) (ii))2
Stop lamp remains on when the brake is released |1.3.1e|1
Nearside Direction indicators not working |1.5.1c|1
Offside Direction indicators not working |1.5.1c|1
Nearside Front Direction indicator damaged and function impaired |1.5.3a|1
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b|1
Direction indicators not working |1.5.1c|1
Front Front wheel bearings have excessive free play |2.3.5b|1
Front Horn not working |1.7.3a|1
Front Brake disc|s| excessively worn |3.2.A1l|1
Rear Brake hose leaking fluid |3.2.B4|1
Rear Brake caliper|s| insecure |3.2.A1j|1
Rear Brake reaction bracket insecure |3.2.A1j|1
Handlebar mounting clamp loose |2.1.1a|1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|1
Rear reflector on motorcycle incorrectly positioned |1.4.2d|1
Rear Brake locking device insecure |3.2.A1e|1
Offside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j|1
Nearside Footrest insecure |6.2.1a|1
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|1
Headlamp aim beam image kick up to the offside |1.6|1
Rear reflector on motorcycle obscured |1.4.1|1
Nearside Front Direction indicators not working |1.5.1c|1
Front Wheel bearing has excessive play |5.1.3 |a| |i||1
Inner Rear Lower Rear wheel insecure |4.2.3b|1
Rear Stop lamp affected by the operation of another lamp |1.3.2|1
Fuel cap mounting flange/sealing method defective |7.2.2c|1
Front Brake lever has inadequate reserve travel |3.1.3b|1
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Rear Rear suspension bearing has excessive free play |2.4.A2a|i||1
Rear Front mudguard can easily contact the wheel |2.3.7|1
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Direction indicator not working |4.4.1 |a| |ii||1
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i||1
Nearside Front Footrest insecure |6.2.1a|1
Nearside Front shock absorber seal failed and leaking oil |2.3.3|1
Offside Front shock absorber seal failed and leaking oil |2.3.3|1
Front Stop lamp deteriorated and function impaired |1.3.3a|1
Rear Roller brake test indicates a binding brake |3.3.A1a|1
Headlamp not working on main beam (4.1.1 (a) (ii))1
Position lamp showing white light to the rear (4.2.3 (a) (ii))1
Steering damper insecure (2.1.4 (d) (i))1
Headlamp lens seriously defective (4.1.1 (b) (ii))1
Rear Wheel spoke excessively loose |4.2.1b|1
Fuel tank leaking (6.1.3 (b) (i))1
Rear Brake pipe connection leaking REAR BRAKE LIGHT SWITCH LOOSE (1.1.11 (b))1
Nearside Rear Shock absorber has negligible damping effect (5.3.2 (b))1
Offside Rear Shock absorber has negligible damping effect (5.3.2 (b))1
Rear Stop lamp not working (4.3.1 (a) (ii))1
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii))1
Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Nearside Front Direction indicator not working (4.4.1 (a) (ii))1
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))1
Position lamp not working (4.2.1 (a))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy