| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 9 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Rear reflector on motorcycle missing |1.4.1| | 3 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
| Registration plate issues | 2 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Nearside Upper Rear suspension component loose |2.4.A.1a| | 1 |
| Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
| Brake hose excessively deteriorated | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Brake hose damaged | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front mudguard insecure |2.3.7| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
| Horn not working |1.7.3a| | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Stop lamp does not illuminate immediately a brake applies front brake |1.3.1a| | 1 |
| Front Brake pipe excessively damaged |3.2.B2a| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear Seat insecure |6.2.1a| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Centre Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Steering damper in such a condition that the steering action is impaired. |2.1.2d| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies Adjusted. |1.3.1a| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Riders seat insecure |6.2.1a| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) | 1 |
| Offside Steering lock stop ineffective (2.1.3) | 1 |
| Steering movement excessively stiff with the weight on the lower bearing (2.2.1a) | 1 |
| Offside Front shock absorber seal failed and leaking oil (2.3.3) | 1 |
| Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |