MOT History from tests of petrol MOTO GUZZI CALIFORNIAs year 1980

Review the list of common MOTO GUZZI CALIFORNIA failures below or to perform a specific mot history check on your MOTO GUZZI then use our popular KnowYourCar service

mot history

Pass percent:87.27%

(The average a petrol MOTO GUZZI CALIFORNIA year 1980 passes without issue)

Based on:165 MOT Tests

Most common failures	No# failures
Front Roller brake test indicates a binding brake \|3.3.A1a\|	3
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	2
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	1
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	1
Fuel hose leaking \|7.2.1a\|	1
Rear Rear reflector on motorcycle missing \|1.4.1\|	1
Headlamp not working on main beam \|4.1.1 \|a\| \|ii\|\|	1
Brake pedal has inadequate reserve travel \|3.1.3b\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Headlamp aim not tested \|1.6\|	1
Front wheel bearings are excessively rough \|2.3.5b\|	1
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	1
Steering control handlebar movement restricted by trapped cables \|2.1.2c\|	1
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	1
Headlamp aim beam image kick up to the offside \|1.6\|	1
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	1
Rear wheel spindle loose \|2.4.A.2b\|	1
Direction indicator not working \|1.5.1c\|	1
Fuel cap sealing washer torn \|7.2.2c\|	1
Rear Brake pedal not releasing correctly and functionality of brakes affected \|1.1.2 \|b\| \|ii\|\|	1
Offside Handlebar grip insecure to handlebar \|2.2.1 \|d\| \|ii\|\|	1
Horn not working \|7.7 \|a\| \|ii\|\|	1
Headlamp aim out of alignment	1
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	1
Brake fluid reservoir leaking hydraulic fluid \|3.2.B1e\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Front Roller brake test indicates a binding brake \|3.3.A1a\|	3
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	2
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	1
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	1
Fuel hose leaking \|7.2.1a\|	1
Rear Rear reflector on motorcycle missing \|1.4.1\|	1
Headlamp not working on main beam \|4.1.1 \|a\| \|ii\|\|	1
Brake pedal has inadequate reserve travel \|3.1.3b\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Headlamp aim not tested \|1.6\|	1
Front wheel bearings are excessively rough \|2.3.5b\|	1
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	1
Steering control handlebar movement restricted by trapped cables \|2.1.2c\|	1
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	1
Headlamp aim beam image kick up to the offside \|1.6\|	1
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	1
Rear wheel spindle loose \|2.4.A.2b\|	1
Direction indicator not working \|1.5.1c\|	1
Fuel cap sealing washer torn \|7.2.2c\|	1
Rear Brake pedal not releasing correctly and functionality of brakes affected \|1.1.2 \|b\| \|ii\|\|	1
Offside Handlebar grip insecure to handlebar \|2.2.1 \|d\| \|ii\|\|	1
Horn not working \|7.7 \|a\| \|ii\|\|	1
Headlamp aim out of alignment	1
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	1
Brake fluid reservoir leaking hydraulic fluid \|3.2.B1e\|	1

MOT History from tests of petrol MOTO GUZZI CALIFORNIAs year 1980

Find us on Facebook