MOT History from tests of petrol MORRIS MINOs year 1971

Review the list of common MORRIS MINO failures below or to perform a specific mot history check on your MORRIS then use our popular KnowYourCar service

mot history

Pass percent:0.00%

(The average a petrol MORRIS MINO year 1971 passes without issue)

Based on:5 MOT Tests

Most common failures	No# failures
Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	2
Offside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Stop lamp not working \|1.2.1b\|	1
Offside Rear Stop lamp not working \|1.2.1b\|	1
Front Vehicle structure has excessive corrosion which adversely affects braking or steering \|6.1.A.1\|	1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering \|6.1.A.1\|	1
Offside Front Vehicle structure has an inadequate repair which adversely affects braking or steering \|6.1.A.1\|	1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Rear position lamp\|s\| excessively deteriorated so that it is not visible from a reasonable distance \|1.1.A.3d\|	1
Registration plate lamp issues	1
Brake hose excessively deteriorated	1
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Parking brake: efficiency below requirements \|3.7.B.7\|	1
Brakes imbalanced across an axle	1
Direction indicators not working \|1.4.A.2c\|	1
Rear Stop lamp not working \|1.2.1b\|	1
Rear passenger seat cannot be secured in the upright position. \|6.2.3\|	1
Brake pipe excessively corroded	1
Nearside Front Front wheel bearing rough when rotated \|2.5.A.2\|	1
Offside Front Front constant velocity joint gaiter insecurely mounted to its housing \|2.5.C.1a\|	1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Front brake disc excessively pitted \|3.5.1h\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	2
Offside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Stop lamp not working \|1.2.1b\|	1
Offside Rear Stop lamp not working \|1.2.1b\|	1
Front Vehicle structure has excessive corrosion which adversely affects braking or steering \|6.1.A.1\|	1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering \|6.1.A.1\|	1
Offside Front Vehicle structure has an inadequate repair which adversely affects braking or steering \|6.1.A.1\|	1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Rear position lamp\|s\| excessively deteriorated so that it is not visible from a reasonable distance \|1.1.A.3d\|	1
Registration plate lamp issues	1
Brake hose excessively deteriorated	1
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Parking brake: efficiency below requirements \|3.7.B.7\|	1
Brakes imbalanced across an axle	1
Direction indicators not working \|1.4.A.2c\|	1
Rear Stop lamp not working \|1.2.1b\|	1
Rear passenger seat cannot be secured in the upright position. \|6.2.3\|	1
Brake pipe excessively corroded	1
Nearside Front Front wheel bearing rough when rotated \|2.5.A.2\|	1
Offside Front Front constant velocity joint gaiter insecurely mounted to its housing \|2.5.C.1a\|	1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Front brake disc excessively pitted \|3.5.1h\|	1

MOT History from tests of petrol MORRIS MINOs year 1971

Find us on Facebook