MOT History from tests of petrol MORRIS MINERs year 1967

Review the list of common MORRIS MINER failures below or to perform a specific mot history check on your MORRIS then use our popular KnowYourCar service

mot history

Pass percent:75.76%

(The average a petrol MORRIS MINER year 1967 passes without issue)

Based on:33 MOT Tests

Most common failures	No# failures
Parking brake: efficiency below requirements \|3.7.B.7\|	5
Service brake: efficiency below requirements \|3.7.B.7\|	4
Offside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	3
Nearside rear brake recording little or no effort \|3.7.B.5a\|	2
Offside rear brake recording little or no effort \|3.7.B.5a\|	2
Horn not working \|1.6.2a\|	2
Brake performance not tested \|3.7.A.1\|	2
Headlamp aim out of alignment	2
Rear parking brake recording little or no effort	2
Brakes imbalanced across an axle	1
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Headlamp not working on dipped beam \|1.7.5a\|	1
Nearside Front Steering locking device missing \|2.2.C.1g\|	1
Offside Front Steering locking device missing \|2.2.C.1g\|	1
Fuel tank leaking \|7.2.3\|	1
Nearside Stop lamp not working \|1.2.1b\|	1
Offside Stop lamp not working \|1.2.1b\|	1
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement \|7.2.4b\|	1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front wheel bearing has excessive play \|2.5.A.3c\|	1
Offside Front wheel bearing has excessive play \|2.5.A.3c\|	1
Offside Rear Braking system leaking \|3.6.A.1\|	1
Offside Windscreen wiper not operating over a large enough area to give an adequate view \|8.2.1c\|	1
All position lamps not working front and rear \|1.1.A.3b\|	1
Registration plate lamp issues	1
Brake pipe fouled by moving parts Front to rear fouling on clutch linkage \|3.6.B.2a\|	1
Brake pipe inadequately supported front to rear \|3.6.B.1\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded shocker mounting \|2.4.A.3\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded shocker mounting \|2.4.A.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg, tie bar mounting \|2.4.A.3\|	1
Nearside Steering rack gaiter split \|2.2.D.2d\|	1
Offside Steering rack gaiter insecure \|2.2.D.2d\|	1
Nearside front brake binding \|3.7.B.1\|	1
Front brake application uneven	1
Rear brake binding	1
rear parking \|secondary\| brakes imbalanced	1
Stop lamp not working \|1.2.1b\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Parking brake: efficiency below requirements \|3.7.B.7\|	5
Service brake: efficiency below requirements \|3.7.B.7\|	4
Offside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	3
Nearside rear brake recording little or no effort \|3.7.B.5a\|	2
Offside rear brake recording little or no effort \|3.7.B.5a\|	2
Horn not working \|1.6.2a\|	2
Brake performance not tested \|3.7.A.1\|	2
Headlamp aim out of alignment	2
Rear parking brake recording little or no effort	2
Brakes imbalanced across an axle	1
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Headlamp not working on dipped beam \|1.7.5a\|	1
Nearside Front Steering locking device missing \|2.2.C.1g\|	1
Offside Front Steering locking device missing \|2.2.C.1g\|	1
Fuel tank leaking \|7.2.3\|	1
Nearside Stop lamp not working \|1.2.1b\|	1
Offside Stop lamp not working \|1.2.1b\|	1
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement \|7.2.4b\|	1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front wheel bearing has excessive play \|2.5.A.3c\|	1
Offside Front wheel bearing has excessive play \|2.5.A.3c\|	1
Offside Rear Braking system leaking \|3.6.A.1\|	1
Offside Windscreen wiper not operating over a large enough area to give an adequate view \|8.2.1c\|	1
All position lamps not working front and rear \|1.1.A.3b\|	1
Registration plate lamp issues	1
Brake pipe fouled by moving parts Front to rear fouling on clutch linkage \|3.6.B.2a\|	1
Brake pipe inadequately supported front to rear \|3.6.B.1\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded shocker mounting \|2.4.A.3\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded shocker mounting \|2.4.A.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg, tie bar mounting \|2.4.A.3\|	1
Nearside Steering rack gaiter split \|2.2.D.2d\|	1
Offside Steering rack gaiter insecure \|2.2.D.2d\|	1
Nearside front brake binding \|3.7.B.1\|	1
Front brake application uneven	1
Rear brake binding	1
rear parking \|secondary\| brakes imbalanced	1
Stop lamp not working \|1.2.1b\|	1

MOT History from tests of petrol MORRIS MINERs year 1967

Find us on Facebook