Most common failures | No# failures |
---|
Registration plate lamp issues | 4 |
Parking brake: efficiency below requirements |3.7.B.7| | 3 |
Nearside Rear Wheel nut|s| missing |4.2.A.1e| | 2 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Offside Rear fog lamp not working |1.3.2b| | 2 |
Brake pedal anti-slip provision missing |3.3.A.1b| | 2 |
Nearside Stop lamp not working |1.2.1b| | 2 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Tie bar/rod attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 2 |
Exhaust system not adequately supported |7.1.1| | 1 |
Brake hose excessively deteriorated | 1 |
Offside Rear Leaf spring to axle securing nut insecure |2.4.B.7b| | 1 |
Nearside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Nearside Front Suspension arm rubber mounting deteriorated resulting in excessive movement compliance bush |2.4.G.2| | 1 |
Fuel cap/sealing device missing |7.2.4a| | 1 |
Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |
Nearside Rear front brake binding |3.7.B.1| | 1 |
Offside Rear front brake binding |3.7.B.1| | 1 |
Nearside Rear Brake lever has restricted free movement |3.5.1k| | 1 |
Offside Rear Brake lever has restricted free movement |3.5.1k| | 1 |
Windscreen wiper does not clear the windscreen effectively | 1 |
Offside Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Inner Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Tie bar/rod has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Front Tie bar/rod has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Front Wheel nut|s| missing |4.2.A.1e| | 1 |
Offside Front Wheel nut|s| missing |4.2.A.1e| | 1 |
Offside Rear Wheel nut|s| missing |4.2.A.1e| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Inner Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 1 |
Nearside Ball joint ball pin shank loose |2.2.B.1c| | 1 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Registration plate issues | 1 |
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front Tie bar/rod synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Tie bar/rod synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Steering rack deformed and unserviceable |2.2.C.1d| | 1 |
Rear fog lamp not working |1.3.2b| | 1 |
Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Nearside Front Lower Suspension arm has excessive play in a pin/bearing |2.4.G.2| | 1 |
Offside Front Lower Suspension arm has excessive play in a pin/bearing |2.4.G.2| | 1 |
Offside Headlamp insecure |1.7.3| | 1 |
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Horn not working |1.6.2a| | 1 |
Offside Inner Rear Leaf spring shackle bracket corroded and seriously weakened |2.4.B.6d| | 1 |
Nearside Outer Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Outer Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Front Body has a projection caused by corrosion |6.1.C.1| | 1 |
Brake performance not tested |3.7.A.1| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Rear brake binding | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Nearside Seat belt buckle not functioning as intended |7.1.2 |d|| | 1 |
Battery insecure and likely to fall from carrier |4.13 |a| |ii|| | 1 |
Offside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Brakes imbalanced across an axle | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
Brake pedal anti-slip provision missing (1.1.2 (c)) | 1 |
Nearside Front Power steering component fouling steering gaiter split (2.1.5 (e) (i)) | 1 |
Emissions not tested because of black smoke (8.2.1.2 (d)) | 1 |