Most common failures | No# failures |
---|
Brake pipe excessively corroded | 17 |
Registration plate lamp issues | 14 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 8 |
Nearside Stop lamp not working |1.2.1b| | 7 |
Headlamp aim out of alignment | 7 |
Windscreen wiper does not clear the windscreen effectively | 7 |
Rear Exhaust system not adequately supported |7.1.1| | 6 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Offside Stop lamp not working |1.2.1b| | 5 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 4 |
Front brake excessively fluctuating | 3 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Front position lamp|s| not working |1.1.A.3b| | 3 |
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 3 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Brakes imbalanced across an axle | 3 |
Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
Offside Front Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 2 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 2 |
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h)) | 2 |
Offside Rear Wheel nut|s| missing |4.2.A.1e| | 2 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 2 |
Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 2 |
Brake hose excessively deteriorated | 2 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
Offside Steering rack gaiter split |2.2.D.2d| | 2 |
Nearside Front Position lamp not working |4.2.1 |a|| | 2 |
Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 2 |
Rear brake disc in such a condition that it is seriously weakened | 2 |
Windscreen wiper blade insecure | 2 |
Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Front Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 1 |
Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
Registration plate issues | 1 |
Rear Rear fog lamp not working |1.3.2b| | 1 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Rear Inner Body has a projection caused by damage bumper |6.1.C.1| | 1 |
Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x member |6.1.B.2| | 1 |
Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing |6.1.B.2| | 1 |
Nearside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Offside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Nearside Front Upper Suspension component mounting prescribed area is excessively corroded shock mounting area- rear of nsf strut turret-under bonnet-chalk marked- |2.4.A.3| | 1 |
Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
Offside Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 1 |
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b)) | 1 |
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 1 |
Nearside Front Direction indicators incorrect colour |1.4.A.2f| | 1 |
Front Direction indicators incorrect colour |1.4.A.2f| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |
Stop lamp has less than 50% of the light sources illuminating High level |1.2.1b| | 1 |
Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Front Lower Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 1 |
Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Outer Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Outer Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Windscreen in an unacceptable condition (3.2 (c) (i)) | 1 |
Nearside Rear coil spring fractured |2.4.C.1a| | 1 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Offside Front Inner Suspension spring mounting prescribed area is excessively corroded wing |2.4.A.3| | 1 |
Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded wing |2.4.A.3| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded cross member |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded cross member |2.4.A.3| | 1 |
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill / wheel arch |2.4.A.3| | 1 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
Central Exhaust has a major leak of exhaust gases box (6.1.2 (a)) | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Offside Rear coil spring broken |2.4.C.1a| | 1 |
Nearside Front Wheel nut|s| missing |4.2.A.1e| | 1 |
Offside Front Wheel nut|s| missing |4.2.A.1e| | 1 |
Nearside Rear Wheel nut|s| missing |4.2.A.1e| | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing (6.2.2 (d) (i)) | 1 |
Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Emissions not tested (8.2.1.2 (d)) | 1 |
Suspension component mounting prescribed area is inadequately repaired front cross member |2.4.A.3| | 1 |
Nearside Suspension component mounting prescribed area is excessively corroded front cross member |2.4.A.3| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded top of coil spring mount |2.4.A.3| | 1 |
Nearside Rear Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
Nearside Front brake disc excessively pitted |3.5.1h| | 1 |
Offside Front brake disc excessively pitted |3.5.1h| | 1 |
Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded inner flitch |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded inner flitch |2.4.A.3| | 1 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded wheel arch |5.2.6| | 1 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded wheel arch |5.2.6| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded crossmember beside o/s frt sill |2.4.A.3| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Battery insecure |1.9.1| | 1 |
Offside Rear Brake hose inappropriately repaired insecure |3.6.A.3| | 1 |
Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Centre Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Outer Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Rear Suspension component mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Nearside Outer Body component likely to become detached sill |6.2.1 |a| |ii|| | 1 |
Offside Outer Body component likely to become detached sill |6.2.1 |a| |ii|| | 1 |
Nearside Towbar excessively corroded within 30cm of towbar mounting |6.1.6 |i| |i|| | 1 |
Offside Towbar excessively corroded within 30cm of towbar mounting |6.1.6 |i| |i|| | 1 |
Offside Rear Brake pipe excessively damaged |1.1.11 |c|| | 1 |
Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill end |7.1.1 |a| |i|| | 1 |
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill end |7.1.1 |a| |i|| | 1 |
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 1 |
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 1 |
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch |7.1.1 |a| |i|| | 1 |
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch |7.1.1 |a| |i|| | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Offside Front Position lamp not working |4.2.1 |a|| | 1 |
Offside Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under bonnet |5.3.6 |a| |i|| | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor |5.3.6 |a| |i|| | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 1 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded strut top |2.4.A.3| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded cross member |2.4.A.3| | 1 |
Nearside Front Suspension arm attachment bracket/mounting bolt missing loose |2.4.G.1| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded to cross member |2.4.A.3| | 1 |
Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sills (5.3.6 (a) (i)) | 1 |
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced bar is corroded (6.1.1 (c) (i)) | 1 |
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced innerwing (6.1.1 (a) (i)) | 1 |
Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced innerwing (6.1.1 (a) (i)) | 1 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Emissions not tested |7.0| | 1 |
Nearside Rear Exhaust system not adequately supported |7.1.1| | 1 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
Front brake application uneven | 1 |
Fuel pipe leaking |7.2.3| | 1 |
Rear parking brake recording little or no effort | 1 |
Offside Rear Passenger`s seat insecure |6.2.A.1| | 1 |
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |