| Most common failures | No# failures |
|---|
| Windscreen wiper does not clear the windscreen effectively | 125 |
| Front brake disc in such a condition that it is seriously weakened | 41 |
| Headlamp aim out of alignment | 32 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 22 |
| Rear fog lamp not working |1.3.2b| | 21 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 21 |
| Registration plate issues | 20 |
| Brakes imbalanced across an axle | 19 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 18 |
| Registration plate lamp issues | 16 |
| Supplementary restraint system warning lamp indicates a fault (7.1.6 (a)) | 14 |
| Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 13 |
| Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 11 |
| Brake pipe excessively corroded | 10 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 10 |
| Windscreen washer not working | 10 |
| Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 9 |
| Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 8 |
| Offside Stop lamp not working |1.2.1b| | 8 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 8 |
| Nearside Front Position lamp not working |4.2.1 |a|| | 6 |
| Front brake excessively fluctuating | 6 |
| Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 6 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 6 |
| Nearside Rear Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 6 |
| Nearside Stop lamp not working |1.2.1b| | 5 |
| Offside Front Coil spring fractured or broken (5.3.1 (b) (i)) | 5 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 5 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 5 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 5 |
| Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 5 |
| Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 5 |
| Supplementary Restraint System warning lamp indicates a fault |5.4.2| | 4 |
| Front brake application uneven | 4 |
| Offside Front front brake binding |3.7.B.1| | 4 |
| Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 4 |
| Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 4 |
| Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 4 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 4 |
| Offside Rear Stop lamp not working |1.2.1b| | 4 |
| Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 4 |
| Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 4 |
| Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b)) | 4 |
| Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 4 |
| Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 4 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 4 |
| Offside front brake binding |3.7.B.1| | 4 |
| Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 4 |
| Offside Front Service brake excessively binding |1.2.1 |f|| | 3 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
| Nearside front brake juddering severely |3.7.A.2b| | 3 |
| Offside front brake juddering severely |3.7.A.2b| | 3 |
| Vehicle Identification Number not displayed |0.2 |a|| | 3 |
| Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 3 |
| Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 3 |
| Windscreen wiper blade insecure | 3 |
| Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 3 |
| Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h)) | 3 |
| Rear brake application uneven | 3 |
| Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 3 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 3 |
| Offside Front Headlamp aim not tested (4.1.2 (b)) | 3 |
| Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 3 |
| Windscreen has damage | 3 |
| Horn not working |1.6.2a| | 3 |
| Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 3 |
| Offside Rear Coil spring fractured or broken (5.3.1 (b) (i)) | 3 |
| Horn not working (7.7 (a)) | 3 |
| Speedometer clearly inoperative |6.7.2| | 2 |
| Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 2 |
| front brakes release unevenly |3.7.B.4| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i|| | 2 |
| Nearside Rear Stop lamp not working |1.2.1b| | 2 |
| Indicator tell tale inoperative |1.4.A.2a| | 2 |
| Hazard warning tell tale not working correctly |1.4.B.1e| | 2 |
| Main beam tell-tale not working |4.9.1 |a| |ii|| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 2 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 2 |
| Offside Rear Wheel nut|s| missing |4.2.A.1e| | 2 |
| Central Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 2 |
| Offside Front coil spring broken |2.4.C.1a| | 2 |
| Nearside Front Headlamp light intensity severely reduced (4.1.4 (a)) | 2 |
| Offside Front Headlamp light intensity severely reduced (4.1.4 (a)) | 2 |
| Offside Front Headlamp not working on dipped beam |1.7.5a| | 2 |
| Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
| Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
| Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
| Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 2 |
| Nearside Stop lamp|s| not working |4.3.1 |a| |ii|| | 2 |
| Nearside Front Service brake excessively fluctuating (1.2.1 (e)) | 2 |
| Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 2 |
| Service brake: efficiency below requirements |3.7.B.7| | 2 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
| Parking brake lever has no reserve travel |3.1.6b| | 2 |
| Anti-lock braking system warning lamp indicates an ABS fault | 2 |
| Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 2 |
| Nearside Rear Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
| Battery insecure |1.9.1| | 2 |
| Nearside Front Suspension arm severely distorted |2.4.G.1| | 2 |
| Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Centre Rear fog lamp not working |1.3.2b| | 2 |
| Nearside Front front brake binding |3.7.B.1| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 2 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
| Offside Front Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Offside Front Position lamp not working |4.2.1 |a|| | 2 |
| Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 2 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 2 |
| Rear fog lamp not working |4.5.1 |a| |ii|| | 2 |