Most common failures | No# failures |
---|
Brake pipe excessively corroded | 6 |
Registration plate lamp issues | 3 |
Brakes imbalanced across an axle | 3 |
Rear parking brake recording little or no effort | 2 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Front Body has a sharp edge caused by corrosion inner sill |6.1.C.1| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill centre |6.1.B.2| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Centre Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings towing eye area |6.1.B.2| | 1 |
Nearside Body has a sharp edge caused by corrosion steps |6.1.C.1| | 1 |
Offside Body has a sharp edge caused by corrosion step |6.1.C.1| | 1 |
Rear brake binding | 1 |
Battery insecure |1.9.1| | 1 |
Steering column universal joint has excessive play |2.1.5| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
rear parking |secondary| brakes imbalanced | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Rear Shock absorber has a serious fluid leak both |2.7.3| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded sill at centre |5.2.6| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
Nearside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Front Exhaust has a major leak of exhaust gases flexi |7.1.2| | 1 |
Offside Rear Body has a sharp edge caused by corrosion wheel arch |6.1.C.1| | 1 |
Nearside Rear Lower Body has a sharp edge caused by corrosion door |6.1.C.1| | 1 |
Offside Rear Hydraulic brake cylinder leaking hydraulic fluid caliper |3.6.A.1| | 1 |
Rear Suspension component mounting prescribed area is excessively corroded both chassis legs |2.4.A.3| | 1 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Horn not working |1.6.2a| | 1 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
Nearside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Rear coil spring fractured |2.4.C.1a| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |