MOT History from tests of petrol MG MIDGETs year 1985

Review the list of common MG MIDGET failures below or to perform a specific mot history check on your MG then use our popular KnowYourCar service

mot history

Pass percent:66.67%

(The average a petrol MG MIDGET year 1985 passes without issue)

Based on:42 MOT Tests

Most common failures	No# failures
Registration plate lamp issues	2
Service brake: efficiency below requirements \|3.7.B.7\|	2
Parking brake: efficiency below requirements \|3.7.B.7\|	1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Rear Braking system leaking \|3.6.A.1\|	1
Nearside Front Upper Front suspension has excessive play in a upper suspension ball joint \|2.5.B.1a\|	1
Nearside rear brake recording little or no effort \|3.7.B.5a\|	1
Nearside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering \|2.5.A.3a\|	1
Offside Front Front wheel bearing has excessive play \|2.5.A.3c\|	1
Nearside Front Shock absorber has an excessively worn shock absorber pivot \|2.7.4\|	1
Nearside Front Anti-roll bar linkage fractured \|2.4.G.1\|	1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Front Direction indicator not working \|1.4.A.2c\|	1
Nearside Rear Direction indicator not working \|1.4.A.2c\|	1
Nearside Rear Shock absorber has negligible damping effect \|2.7.5\|	1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Rear position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Offside Rear position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Nearside Headlamp not working on dipped beam \|1.7.5a\|	1
Offside Headlamp not working on dipped beam \|1.7.5a\|	1
Nearside Headlamp not working on main beam \|1.7.5a\|	1
Offside Headlamp not working on main beam \|1.7.5a\|	1
Nearside Headlamp adversely affected by the operation of another lamp \|1.7.5c\|	1
Offside Headlamp adversely affected by the operation of another lamp \|1.7.5c\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Parking brake lever has no reserve travel \|3.1.6b\|	1
Offside Front Upper Suspension arm attachment bracket/mounting insecure \|2.4.G.1\|	1
Nearside Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Direction indicators not working \|1.4.A.2c\|	1
Exhaust emissions carbon monoxide content excessive \|7.3.B.1a\|	1
Offside Front Lower Suspension component mounting prescribed area is excessively corroded floor to sill/wheel arch \|2.4.A.3\|	1
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill \|2.4.A.3\|	1
Offside Front Lower Body has a sharp edge caused by corrosion wing \|6.1.C.1\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Registration plate lamp issues	2
Service brake: efficiency below requirements \|3.7.B.7\|	2
Parking brake: efficiency below requirements \|3.7.B.7\|	1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Rear Braking system leaking \|3.6.A.1\|	1
Nearside Front Upper Front suspension has excessive play in a upper suspension ball joint \|2.5.B.1a\|	1
Nearside rear brake recording little or no effort \|3.7.B.5a\|	1
Nearside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering \|2.5.A.3a\|	1
Offside Front Front wheel bearing has excessive play \|2.5.A.3c\|	1
Nearside Front Shock absorber has an excessively worn shock absorber pivot \|2.7.4\|	1
Nearside Front Anti-roll bar linkage fractured \|2.4.G.1\|	1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Front Direction indicator not working \|1.4.A.2c\|	1
Nearside Rear Direction indicator not working \|1.4.A.2c\|	1
Nearside Rear Shock absorber has negligible damping effect \|2.7.5\|	1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Rear position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Offside Rear position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Nearside Headlamp not working on dipped beam \|1.7.5a\|	1
Offside Headlamp not working on dipped beam \|1.7.5a\|	1
Nearside Headlamp not working on main beam \|1.7.5a\|	1
Offside Headlamp not working on main beam \|1.7.5a\|	1
Nearside Headlamp adversely affected by the operation of another lamp \|1.7.5c\|	1
Offside Headlamp adversely affected by the operation of another lamp \|1.7.5c\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Parking brake lever has no reserve travel \|3.1.6b\|	1
Offside Front Upper Suspension arm attachment bracket/mounting insecure \|2.4.G.1\|	1
Nearside Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Direction indicators not working \|1.4.A.2c\|	1
Exhaust emissions carbon monoxide content excessive \|7.3.B.1a\|	1
Offside Front Lower Suspension component mounting prescribed area is excessively corroded floor to sill/wheel arch \|2.4.A.3\|	1
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill \|2.4.A.3\|	1
Offside Front Lower Body has a sharp edge caused by corrosion wing \|6.1.C.1\|	1

MOT History from tests of petrol MG MIDGETs year 1985

Find us on Facebook