>

MOT History from tests of petrol MERCEDES BENZ HYMERs year 1981

Review the list of common MERCEDES BENZ HYMER failures below or to perform a specific mot history check on your MERCEDES BENZ then use our popular KnowYourCar service

mot history
Pass percent:31.82%
(The average a petrol MERCEDES BENZ HYMER year 1981 passes without issue)
Based on:22 MOT Tests
Most common failuresNo# failures
Brake hose excessively deteriorated5
Windscreen wiper does not clear the windscreen effectively5
Brakes imbalanced across an axle4
Brake pipe excessively corroded4
Offside Rear reflector missing |4.8.2 |a| |ii||2
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|2
Registration plate lamp issues2
Headlamp aim out of alignment2
Front Exhaust has a major leak of exhaust gases |7.1.2|2
Nearside Front position lamp|s| not working |1.1.A.3b|2
Exhaust emissions hydrocarbon content excessive |7.3.B.1b|2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength with in 30cm of spring hanger |5.3.6 |a| |i||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger |5.3.6 |a| |i||1
Service brake efficiency less than 50% of the required value |1.2.2 |a| |ii||1
Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii))1
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii))1
Nearside Side repeater not working |1.4.A.2c|1
Rear Exhaust has a major leak of exhaust gases |7.1.2|1
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Battery insecure |1.9.1|1
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|1
Nearside Rear Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3|1
Centre Exhaust has a major leak of exhaust gases |7.1.2|1
Front position lamp|s| not working both |1.1.A.3b|1
Brake load sensing valve linkage obviously incorrectly adjusted |3.6.E.3|1
Rear fog lamp switch missing |4.5.3 |a| |ii||1
Rear fog lamp not working |4.5.1 |a| |ii||1
Offside Front Position lamp not working |4.2.1 |a||1
Nearside Front Headlamp not working on dipped beam |4.1.1 |a| |ii||1
Nearside Headlamp aim not tested |4.1.2 |b||1
Offside Front Position lamp not working |4.2.1 |a| |ii||1
Windscreen washer not working 1
Rear fog lamp obviously incorrectly positioned |4.5.4 |a||1
Rear Service brake excessively fluctuating |1.2.1 |e||1
Nearside Rear reflector missing |4.8.2 |a| |ii||1
Offside Front Seat belt buckle not functioning as intended (7.1.2 (d))1
Windscreen wiper not working (3.4 (a))1
Nearside Headlamp light intensity severely reduced (4.1.4 (a))1
Offside Headlamp not working on main beam |1.7.5a|1
Nearside Headlamp aim beam image kick up to the offside |1.8|1
Offside Headlamp aim beam image kick up to the offside |1.8|1
Nearside Rear Position lamp missing |4.2.1 |a| |ii||1
Nearside Driver`s door cannot be opened from inside the vehicle |6.2.B.1b|1
Horn not working |7.7 |a| |ii||1
Offside Front position lamp|s| not working |1.1.A.3b|1
Rear Brake hose bulging under pressure |3.6.B.3|1
Nearside Windscreen wiper not operating automatically when switched on |8.2.1b|1
Mechanical brake component has restricted free movement1
Offside Rear Rear fog lamp not working |1.3.2b|1
Nearside Front Headlamp aim beam image kick up to the offside |1.8|1
Offside Front Headlamp aim beam image kick up to the offside |1.8|1
Exhaust emissions carbon monoxide content excessive |7.3.B.1a|1
Service brake: efficiency below requirements |3.7.B.7|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength with in 30cm of spring hanger |5.3.6 |a| |i||1
Offside Rear Body has a sharp edge caused by damage |6.1.C.1|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy