Most common failures | No# failures |
---|
Registration plate lamp issues | 8 |
Parking brake: efficiency below requirements |3.7.B.7| | 7 |
Windscreen wiper does not clear the windscreen effectively | 6 |
Brake pipe excessively corroded | 4 |
Nearside Stop lamp not working |1.2.1b| | 3 |
Service brake: efficiency below requirements |3.7.B.7| | 3 |
Brakes imbalanced across an axle | 3 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 3 |
Offside Stop lamp not working |1.2.1b| | 2 |
Offside Headlamp not working on main beam |1.7.5a| | 2 |
Parking brake: efficiency below requirements |3.7.C.1b| | 2 |
Registration plate issues | 2 |
Brake hose damaged | 2 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Nearside All position lamps adversely affected by the operation of another lamp with nearside indicator on |1.1.A.3f| | 2 |
Headlamp aim out of alignment | 2 |
Brake hose excessively deteriorated | 2 |
Offside Outline marker lamp not working (4.2.1 (a) (ii)) | 2 |
Offside Outer Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Hazard warning switch faulty |1.4.B.1d| | 1 |
Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Anti-roll bar linkage has excessive play in a pin/bearing |2.4.G.2| | 1 |
Offside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Headlamp aim beam image kick up to the offside |1.8| | 1 |
Towbar component insecure |6.6.1| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Driver`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 1 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 1 |
Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
Nearside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Offside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Windscreen has damage | 1 |
Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Nearside Front Battery insecure |1.9.1| | 1 |
Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Front Anti-roll bar linkage synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear position lamp|s| incomplete |1.1.4a| | 1 |
Nearside Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
Offside Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
Offside Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Brake fluid not visible |1.1.10 |d| |iii|| | 1 |
Brake valve leaking such that brake functionality is affected load valve |1.1.7 |d| |ii|| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Horn not working |1.6.2a| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Headlamp aim not tested |1.8.A.1c| | 1 |
Front brake application uneven | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Steering rack gaiter missing or no longer prevents the ingress of dirt both rack gaiters perished |2.1.3 |g| |ii|| | 1 |
Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
Offside Upper Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Front Drag link end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Rear Drag link end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Power steering pipe|s| or hose|s| leaking |2.3.3b| | 1 |
Offside Outline marker lamp not working x2 (4.2.1 (a) (ii)) | 1 |
Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill rear (5.3.6 (a) (i)) | 1 |
Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill rear (5.3.6 (a) (i)) | 1 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Rear Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
Nearside Rear Wheel bearing so rough it is likely to overheat or break up Brake excessively binding, unable to test wheel bearing (5.1.3 (b) (ii)) | 1 |
Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
Nearside Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Rear Upper Direction indicator not working (4.4.1 (a) (ii)) | 1 |