Most common failures | No# failures |
---|
Headlamp aim out of alignment | 9 |
Rear brake binding | 6 |
Horn not working |1.6.2a| | 4 |
Nearside Stop lamp not working |1.2.1b| | 4 |
Registration plate lamp issues | 4 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 3 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 3 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside front brake binding |3.7.B.1| | 3 |
Brake hose excessively deteriorated | 3 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 3 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Rear Exhaust system not adequately supported |7.1.1| | 2 |
Offside Stop lamp not working |1.2.1b| | 2 |
Nearside Front front brake binding |3.7.B.1| | 2 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside front brake binding |3.7.B.1| | 2 |
Front Passenger`s seat cannot be secured in the upright position. |6.2.A.2| | 2 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Centre Exhaust system not adequately supported |7.1.1| | 2 |
Windscreen wiper does not clear the windscreen effectively | 2 |
Brake pipe excessively corroded | 2 |
Rear parking brake recording little or no effort | 2 |
Brake hose has insufficient room to move | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill/floor |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis/inner wheel arch |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill/inner wheel arch |2.4.A.3| | 1 |
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded INNER WHEEL ARCH |3.6.C.3| | 1 |
Direction indicators flashing less than 60 times a minute Not Flashing |1.4.A.2g| | 1 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 1 |
Nearside Front Sub-frame has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Front Sub-frame has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Brake pedal anti-slip provision missing |3.3.A.1b| | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Nearside Front Seat belt retracting mechanism defective |5.2.5b| | 1 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 1 |
Nearside Headlamp excessively damaged so that the light output is severely reduced wet inside. |1.7.5a| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch. |2.4.A.3| | 1 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Battery insecure |1.9.1| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded towards rear of vehicle. |5.2.6| | 1 |
Brake pedal anti-slip provision worn smooth |3.3.A.1b| | 1 |
Driver`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded anti roll bar mount |2.4.A.3| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Direction indicators not working |1.4.A.2c| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Steering column universal joint has excessive play |2.1.5| | 1 |
Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
Exhaust system not adequately supported |7.1.1| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings doorstep |6.1.B.2| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded anti roll bar mount |2.4.A.3| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings anti roll bar area |6.1.B.2| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 1 |
Nearside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill/floor |2.4.A.3| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear Body insecure to the extent that stability is seriously impaired N/S O/S Seal Has Hole (6.2.2 (a) (ii)) | 1 |