Most common failures | No# failures |
---|
Headlamp aim out of alignment | 8 |
Windscreen wiper does not clear the windscreen effectively | 4 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Nearside Front Seat belt retracting mechanism defective |5.2.5b| | 1 |
Nearside Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Brake pedal creeps down when held under pressure |3.3.B.1a| | 1 |
Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
Power steering pipe|s| or hose|s| leaking from a seal |2.3.3b| | 1 |
Offside Rear fog lamp missing |1.3.2a| | 1 |
Brake fluid contaminated |1.8 |a|| | 1 |
All direction indicators not working ALL |4.4.1 |a| |ii|| | 1 |
Nearside Passenger`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
Nearside Front Direction indicators not working |1.4.A.2c| | 1 |
Offside Front Direction indicators not working |1.4.A.2c| | 1 |
Nearside Rear Direction indicators not working |1.4.A.2c| | 1 |
Offside Rear Direction indicators not working |1.4.A.2c| | 1 |
Brakes imbalanced across an axle | 1 |
Brake pedal anti-slip provision worn smooth |3.3.A.1b| | 1 |
Driver`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
Nearside Front Passenger`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
Speedometer cannot be illuminated. |6.7.3| | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 1 |
Central Drag link end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt CENTER TRACK ROD O/S BALL JOINT |2.2.C.1c| | 1 |
Offside Front Seat belt anchorage prescribed area is inadequately repaired INTEGRAL SEATBELTS ...PRISCRIBED AREA FROM O/S FRONT SEAT MOUNTS |5.2.6| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded ANTI-ROLL BAR MOUNT |2.4.A.3| | 1 |
Nearside Rear Suspension component mounting prescribed area is inadequately repaired ANTI-ROLL BAR MOUNT NOT SEAM WELDED |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded ANTI-ROLL BAR MOUNT |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is inadequately repaired ANTI-ROLL BAR MOUNT NOT SEAM WELDED |2.4.A.3| | 1 |
Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded STRUCTURE CORRODED AND HOLED TO EXCESS |2.4.A.3| | 1 |
Nearside Rear Suspension component mounting prescribed area is inadequately repaired INAPPROPRIATE GAUGE METAL ...TOO THIN AND NOT SEAM WELDED |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded UNDERSILL AND BEHIND WHEEL HOUSING |2.4.A.3| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded ANTI-ROLL BAR MOUNT |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded ANTI-ROLL BAR MOUNT |2.4.A.3| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at front of chassis |6.1.B.2| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at front of chassis |6.1.B.2| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded at anti roll bar mounting |2.4.A.3| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Registration plate lamp issues | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting @ font subframe mounting point (6.2.2 (d) (i)) | 1 |
Offside Front Subframe mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
Nearside Front Sub-frame pin or bush excessively worn rear bush on sub-frame (5.3.4 (a) (i)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Front Headlamp levelling device inoperative both headlights (4.1.5 (a)) | 1 |
Rear Service brake excessively fluctuating both rear brakes (1.2.1 (e)) | 1 |
Nearside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 1 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |